What are the design principles for a five-star hotel lobby?

1. General plan design requirements:

(1) In the general plan, the hotel should be located in an important location, close to the main road of the city, and should be set up independently.

(2) It is advisable to set back 25 meters from the red line in front of the hotel’s main entrance.

2. Design requirements for the underground part of the hotel:

(1) The main functions of the underground part are logistics services, parking and equipment rooms, and a nightclub will be set up according to the situation.

(2) The underground building area (excluding parking area) shall not exceed 8,000 square meters if a nightclub is set up, and shall not exceed 6,500 square meters if a nightclub is not set up.

(3) The nightclub only represents the scope, not the internal layout.

3. Design requirements for the first floor of the hotel:

(1) The area of ??the open space in the first floor lobby should be 600~800 square meters. There should be no pillars within 10 meters from the entrance. It is advisable to decorate the lobby.

(2) VIP rooms should be set up in the buffet area.

(3) In the passenger elevator area, consideration should be given to avoiding direct sight lines to the general information desk.

4. Design requirements for the second floor of the hotel:

(1) The second floor of the hotel is generally used for catering functions, including Chinese restaurants and flavor restaurants.

(2) Western restaurants can be set up in big cities such as Beijing and Shanghai; hotels in prefecture-level cities do not have flavor restaurants, only Chinese restaurants.

(3) The hotel’s Chinese restaurant should have 8 to 12 private rooms; there should be at least one luxury private room with an area of ??more than 100 square meters, and the dining table should be more than 25 to 30 people . All restaurant private rooms in the project must have a serving room, preferably with a bathroom.

(4) For riverside hotels (such as Fuzhou, Wuchang and other riverside projects), the restaurant should be placed on the fourth floor with an outdoor viewing platform, and the wellness section should be placed on the second floor.

5. Design requirements for the third floor of the hotel:

(1) The third floor of the hotel is used as a conference and grand banquet hall.

(2) Consideration should be given to setting up 1 to 2 meeting halls, one of which can accommodate 40 people. The meeting hall should be equipped with toilets and cloakrooms.

(3) It is advisable to set up a medium-sized conference room of about 250 to 300 square meters, and about 8 small and medium-sized conference rooms, which can be on a different floor than the grand banquet hall.

(4) A bathroom with sufficient area should be considered.

(5) A cloakroom should be considered.

(6) The net area of ??the grand banquet hall is about 1,300 to 1,800 square meters depending on the city, and can be divided into three medium-sized conference halls at the same time.

6. Design requirements for the fourth floor of the hotel:

(1) In principle, the fourth floor of the hotel is for recreation and sports functions.

(2) Consider functions such as swimming, fitness and aerobics, beauty salons and SPA clubs.

(3) The SPA club should be designed according to the full-suite model of Litiantangren, with 5 to 7 sets according to the area, each set is about 150 to 300 square meters. Each set includes sauna and SPA functions, as well as single rooms and chess and card rooms. The hot and cold pools are 500 meters above the ground and 500 meters lower. The net height of the water surface is about 500~600mm.

(4) The hotel gym should be 100~200 square meters.

(5) The rest area of ??the hotel swimming pool should be 40 to 50 square meters.

(6) The beauty salon should set up 1 to 2 VIP rooms.

7. Hotel executive floor design requirements:

(1) The executive lounge should be arranged close to the passenger elevator room, and the location should take into account the surrounding environment and landscape.

(2) The reception desk of the executive lounge should be arranged to welcome guests.

8. Design requirements for hotel bathrooms:

(1) The public bathroom of the hotel must have two doors. After entering the first door, men and women can be separated.

(2) The bathroom is best designed to be a relatively square space, with sanitary ware placed on the side. It is best to leave an open space of about 4 square meters in the middle of the room, and do not design it into a long and narrow space.

(3) There are no less than 10 urinals and about 8 toilet seats in the men’s bathroom of the grand banquet hall. The women's restroom has about 15 toilet seats.

(4) The bathroom of the hotel suite room should be equipped with two wash basins. The presidential bathtub should not be too high, and the height should be controlled at about 500.

9. Design requirements for hotel supporting facilities:

(1) Where multiple freight elevators in a hotel are located in one core tube, they must be arranged together and must not be scattered.

(2) The equipment room in the hotel podium should be placed on the mezzanine as much as possible to occupy less effective area.

(3) All air conditioners use four pipes.

(4) The cold and hot water supply pipelines in the hotel should be set up separately.

10. Hotel floor height design requirements:

(1) The height of the lobby on the first floor should not be less than 12 meters (7.5 meters), and the height of the hotel should be increased appropriately for waterfront hotels.

(2) The floor height of the banquet hall shall not be less than 10 meters.

(3) The floor height of guest rooms should be 3.6~3.8 meters.

11. Other design requirements for hotels:

(1) The facade facing materials of new hotels in the Three North Regions (Northeast, Northwest, and North China) should be made of stone as much as possible, with less Use aluminum plates (consider acid rain corrosion).

(2) When the hotel calculates the proportion of suites, the presidential suite is not included.

(3) Six-star hotels do not have twin rooms, and five-star hotels provide about 30.