Sike hotel

Hehe, QQ can be added, and I can give you a reply without it.

We now provide customers with large-scale network coverage, generally using relay mode, optical fiber does not need to go to the room, just to the floor. Every floor, because typing too much will increase your pressure, so I will provide you with a solution in a short way, as long as you can install optical fiber, you can understand.

1. The computer room must have a hard enough core switch with firewall function. In order to prevent network paralysis caused by ARP spoofing, a computer and a network management switch are needed. Cisco is recommended.

2. Fiber to the center of each floor, and use 100MW or larger repeater to send signals, so as to save network cables, and wireless is better than wired.

According to the different structures of several floors, the location of wireless AP points is set, so that AP can cover every dead corner, and the selection of AP antennas is more knowledgeable. The position of two antennas above 3DBI and 7DBI determines the quality of signal transmission and reception. 7DBI is not better than 3DBI, so different antennas are used according to different positions.

3. assign an IP address. There is IP access point information on the back of the hotel check-in guest identification card. Vips can enjoy high bandwidth allocation. Without IP information, they can still get better network allocation. Cluster network hotels can't avoid it. They must provide password-free AP sources to attract people around them, so as to achieve the purpose of negative advertising.

By the way, how many meters of optical fiber network do you plan to build? There is no standard information, so we can only provide the scheme here. You'd better have a 3D drawing of the floor, or a basic structure drawing, and your estimated cost. Otherwise it's just an armchair strategist. ....