What if the heating is too hot?

1, you can turn down the heating valve to reduce the heat emitted by the heating; 2, you can put a wet towel on the radiator, or put a pot of water indoors to let the water evaporate to increase the indoor air humidity; 3. You can also buy a humidifier to increase the indoor humidity and achieve the cooling effect; If the heating is too hot, you can hang a wet towel on the bedside and apply olive oil on your nose before going to bed.

What is the reason why the radiator is not hot?

1, heating system reason

The radiator is not hot, which may be that the top floor residents close the partition door, which leads to the interruption of the loop, or that the heating system is blocked and leaks, which affects the heating effect of the whole system.

2, heating itself.

At present, many residents are still using old cast iron for heating, which is old in appearance and has poor heating effect. Therefore, if heating is installed at home, you must choose heating with good performance and good heating effect, so as to ensure the service life and achieve the heating effect.

3. the sound of water in the heating

The installation method of heating is very important. If there is gas in the radiator that cannot be discharged, it will also affect the heating effect of the radiator. The solution is to close the radiator water supply valve, open the exhaust valve and open the water supply valve.

4. Heating vibration

Also check whether the radiator pendant is loose. If there is no looseness, check whether there is radiator vibration caused by earthquake source in the system.

5. The heater is not hot locally.

The radiator is not hot, which may be the way of installation in and out, because there is gas in the radiator that cannot be discharged. The solution is to open the exhaust valve to exhaust the gas in the radiator, or check whether the pressure difference or flow rate of the system is too small.

6. Overall heating is not hot

When the radiator is not hot, also check whether the diversion valve is inverted when the radiator is installed. Incorrect installation method will also lead to the radiator not being hot. It is also necessary to check whether the flow valve is not opened when the radiator is installed, or whether there is a problem with the system.