How to change the switch battery of Kohler basin?

Kohler basin switch battery replacement method is as follows.

1, with the sensing window facing downwards and at least 25CM away from the bottom of the sink. Turn off the water source of the water inlet where the product is to be installed, and open the packaging box, which contains the faucet body.

2. Wrap the water inlet thread on the faucet body with raw material belt or leak-proof glue, screw the faucet body into the wall, and install the water inlet pipe in a fixed position.

3. Disassemble the battery box cover of the protruding part of the top cover above the induction faucet body, carefully pull out the battery box inside, and put four new No.3 alkaline batteries into the positive and negative poles according to the instructions. At this time, the red light of the sensing window on the faucet body will keep flashing. After the red light of the sensing window on the faucet body does not flash, it will be locked and pushed into the battery box to complete the installation.

4. Turn on the water source of the water inlet where the product is to be installed, stop it back and forth in front of the induction window by hand after 3 minutes, and the water will automatically flow out, and adjust the water output through the water valve button.