How to operate the hotel smart lock?

I. Software

1, software authorization, put the software authorization card on the reader, find the authorized place on the software, and click authorize.

2. change the password? Add operators and give them different permissions.

3. Set the hotel layout and add hotel building-area-area-floor.

4. Add the room type and room number (the room number must correspond to the correct building-region-region and floor).

Second, send a setup card.

1. room setting cards (one for each room, with corresponding room number affixed)

2. Time card (the time card shall be used immediately after being swiped, and must be re-made if it exceeds 1 hour)

3. Initialization cards (some are also called clearing cards, which are used to clear the authorization information of the door lock).

Third, set the door lock information.

1. Check whether the door lock is installed correctly and whether the battery is installed correctly.

2. Set the door lock information, which is in turn: swipe the door lock authorization card-room setting card (swipe the corresponding room number) time card. If all the lights are on normally, it means success.

3. When testing, you can open the door by swiping the guest card in the corresponding room.