How to paste words on the glass door?

You can blow it with a hair dryer at a low temperature about 20 cm away from the sticker, then scrape the corner with a ruler and tear it off slowly by hand.

When you meet the tight part, use a hair dryer to strengthen it, so that you can soften the glue with a hair dryer and scrape it off gently with a ruler. And this method is not only suitable for paper stickers, but also effective for plastic stickers. Rub some washing powder on the glass door first, choose a ruler to fix it, and then paste the words to be pasted. If you're afraid it won't look good. Look at other stores.

Extended data:

Methods to prevent the glue on the glass door from being difficult to remove;

1. Use electrostatic sticker: Just like the electrostatic screen saver used on our mobile phones, before pasting the sticker, buy an electrostatic sticker and paste it on the glass, and then paste it on the electrostatic sticker paper. So next time, just take off the electrostatic sticker and throw it away.

2, sucker paste: put the sticker in the sucker paste, the method is similar to electrostatic paste, but the sucker paste can be reused, and the sticker can be replaced with a new one.

The surface of the glass glue to be bonded to the substrate must be clean and free of other attachments (such as dust). ), otherwise the glass glue will not stick firmly or fall off after curing.

Acidic glass glue will release irritating gas during curing, which will irritate eyes and respiratory tract. So be sure to open the doors and windows after construction, and then move in after the gas is completely cured.