Traditional Culture Encyclopedia - Hotel reservation - Briefly describe the safety problems existing in the hotel.

Briefly describe the safety problems existing in the hotel.

The security problems in the hotel include fire safety, anti-theft safety, elevator safety and so on.

1, fire safety issues

Hotels use a lot of electrical appliances and flammable items, such as televisions, hair dryers, bedding, etc., which are easy to cause fires. Hotels should be equipped with fire-fighting equipment, such as fire extinguishers and smoke detectors. , and establish and improve the fire emergency plan.

2, anti-theft security issues

Many hotel guests will carry valuables, such as jewelry and cash. These are easy targets for theft. Hotels should strengthen access control management, ensure the safety of guests' property and provide safe deposit boxes and other facilities.

3, elevator safety issues

Hotel elevators are prone to failures, such as elevator falls, door clips and other accidents. Hotels should strengthen elevator maintenance management, regularly check elevator equipment, and set up warning signs and emergency facilities.

Hotel safety management system and safety measures;

1. The person in charge of the department is the person in charge of fire safety of the department, and is specifically responsible for the daily safety management of natural gas facilities and equipment.

2. All personnel in places where natural gas is used must be familiar with the nature of gas, fire risk, fire prevention measures and operation methods, and must be familiar with fire prevention and extinguishing knowledge, and take up their posts after passing the training.

3, the use of natural gas should strictly abide by the operating rules, point gas should be carried out in accordance with the principle of first ignition and then open gas.

4. When the gas cooker is in use, the operator shall not leave the job site to prevent flameout and air leakage caused by splashing or strong wind.

5, found that the gas leakage to quickly cut off the main switch of the gas source, take timely ventilation measures, and report to the engineering department, close the main valve before coming off work, lock the door before leaving.