How to get to Causeway Bay Seaview Hotel from the airport?

Causeway Bay Seaview Hotel is located in Hong Kong Special Administrative Region, and the airport is Hong Kong International Airport by default. The specific route is as follows:

Bus route: Airport Express → Hong Kong Island Line, the whole journey is about 38.2km.

1. Walk from Hong Kong International Airport about 1 10 meters to the airport station.

2. Take the Airport Express, pass three stops and arrive at Hong Kong Station.

3. Walk about 10 meter and change to the Hong Kong Island Line.

4. Take the Hong Kong Island Line, pass 4 stops and arrive at Tin Hau Station.

5. Walk about 330 meters to Causeway Bay Seaview Hotel.

Driving route: the whole journey is about 38.9 kilometers.

Starting point: Hong Kong International Airport

1. Start south from the starting point, drive along Runway South Road for 4 10 meters, and turn left into South Ring Road.

2. Drive along the South Ring Road for 790 meters, get off at the second exit, turn left slightly and enter Junyun Road.

3. Drive along Junyun Road for 240 meters and go straight into Junyun Road.

4. Drive along Junyun Road for 390 meters, take the second exit, go to Hong Kong Air Cargo Terminal/Kowloon, and go straight into Junyun Road.

5. Drive along Junyun Road for 530 meters and go straight into Junyun Road.

6. Drive along Junyun Road for 250 meters, take the third exit, go to Kowloon /8, turn right slightly and get on the ramp.

7. Drive along the ramp for 530 meters and go straight into Airport Road.

8. Drive along Airport Road 1.0 km and go straight into North Lantau Highway.

9. Drive along the North Lantau Highway12.5km and go straight into the Lantau Link.

10. Drive along the Lantau Link for 4.3km, drive towards 3/ Container Terminal 1-7/ Kowloon/Hong Kong, turn left slightly and get on the ramp.

1 1. Drive along the ramp for 940 meters and go straight into Changqing Highway.

12. Drive along Changqing Highway for 790 meters and go straight into Changqing Tunnel.

13. Drive along Changqing Tunnel 1.6km and go straight into Qingkui Highway.

14. Drive along Qingkui Highway for 4.7 kilometers and go straight into West Kowloon Highway.

15. Drive along West Kowloon Highway for 2.7 kilometers, turn left slightly and get on the ramp.

16. Drive along the ramp for 320 meters and go straight into the ideal road.

17. Drive along the ideal road for 450m, and then turn right.

18. Drive 40 meters towards Hong Kong/Hung Hom, turn right slightly and get on the ramp.

19. Drive along the ramp for 220 meters and go straight into the West Kowloon Corridor.

20. Drive along the West Kowloon Corridor 1.4km, turn left slightly and get on the ramp.

2 1. Drive along the ramp for 350 meters and go straight into Kangzhuang Road.

22. Drive along Kangzhuang Road for 390 meters, turn left slightly and enter the Cross-Harbour Tunnel.

23. Drive along the Cross-Harbour Tunnel for 460m and go straight into the Cross-Harbour Tunnel in Hung Hom.

24. Drive along the cross-harbour tunnel in Hung Hom for 1.9 km and go straight into Wan Chai roundabout.

25. Drive 30 meters along Wan Chai roundabout, drive in the north corner /4 direction, turn left slightly and go up the ramp.

26. Drive along the ramp for 330m, heading for Victoria Park Road/Electric Road/North Point/Chai Wan, and go straight into the Island Eastern Corridor.

27. Drive along the Island East Corridor for 280 meters. At the exit of Victoria Park Road, turn left slightly and go up the ramp.

28. Drive along the ramp for 400 meters, turn right slightly and enter Yongxing Street.

29. Drive along Yongxing Street for 290 meters and turn right into King Road.

30. Drive along King Road for 220 meters and reach the terminal (on the left side of the road).

End point: Ruxin Causeway Bay Seaview Hotel