Ecological wood wall installation method

Ecological wood wall is a new wall material which is environmentally friendly, healthy and not easy to deform. Widely used in home, hotel, villa interior decoration.

Ecological wood wall installation steps are as follows:

1. Prepare tools

Tools to be prepared for installing ecological wood wall include: woodworking glue, electric hammer, hammer, tape measure, gypsum board drill, hand saw, wooden hammer, etc.

2. Confirm the position and size of the wall.

Before installation, first determine the location and size of the wall. Measure the length and width of the wall with a tape measure to ensure that the ecological wood wall can be completely covered.

3. Chop down the wall of ecological wood.

According to the size of the wall, cut the wall of ecological wood into appropriate sizes with tools such as hand saw or gypsum board drill. Pay attention to protect your hands and eyes when cutting, and try not to waste the remaining small pieces of wood.

Deal with the wall

Before hanging the wall, the dust and sundries on the wall must be cleaned to confirm whether the wall is flat or not. If you find that the wall is uneven, you can use a wooden hammer or woodworking glue to make up some clean wood blocks until the wall is flat.

5. Paste the ecological wood wall.

Coat the back of ecological wood wall with woodworking glue and stick it on the wall. Tap the wall gently with an electric hammer and hammer to ensure that ecological wood wall and wall are firmly bonded together.

Widen the gap

After the wall hanging is completed, it is necessary to seal the gap on the wall of ecological wood to make it more beautiful. You can use the same color wall paint, or you can use wood fillers suitable for wooden surfaces.

These are the concrete steps of wall installation in ecological wood. If you encounter installation problems or need more detailed instructions, please consult a professional wall decoration company.