Traditional Culture Encyclopedia - Hotel reservation - safety protocol

safety protocol

In the real society, more and more places need to use agreements. After signing the agreements, there are laws to follow and evidence to check. How should the agreement be drafted? The following are six security protocols that I have collected for reference only. Let's have a look.

Guarantee Agreement 1 Party A: (hereinafter referred to as Party A)

Party B: (hereinafter referred to as Party B)

1. In order to prevent the occurrence of employee safety accidents, Party A and Party B reached an agreement on Party B's job training and safety responsibilities during his stay in Party A's hotel on the principle of equality and voluntariness through full friendly negotiation, and both parties shall abide by it.

Party A shall regularly educate Party B about safety knowledge and inform employees to protect personal safety and property safety, especially to prevent personal accidents.

2. During working or training in the hotel, if Party B leaves the work and living area (leave, temporary leave, leave, go out without permission, etc.). ), Party B shall bear the losses, and Party A shall not bear the responsibilities.

3. Party B should always pay attention to its own safety during work, and it is forbidden to climb mountains, play dangerous games or do dangerous actions. In case of personal injury and other accidents, Party B shall be responsible for it, and Party A shall not bear any responsibility.

4. Party A prohibits Party B from engaging in illegal activities such as drug abuse, fighting, fraud and extortion. , and always supervise and guide Party B not to engage in the above activities. If Party B engages in illegal activities (such as drug abuse, fighting, fraud, extortion, etc.). ) If it is investigated by the state judicial organs outside the hotel or working hours, the parties concerned shall bear all economic and legal responsibilities, and Party A shall not bear any responsibilities.

5. The hotel advocates that smoking is harmful to health, and smoking is prohibited in work and study areas. If smokers really need to smoke in the places (smoking areas) set up by the hotel, they should not throw cigarette butts at will and put them out completely to avoid fire. In case of any accident, Party B shall bear all economic compensation responsibilities and personal losses, and Party A shall not bear any responsibilities.

6. During the work in the hotel, if you drive out the hotel or private vehicle without approval, violate the traffic rules and have a traffic accident, causing casualties, all economic and legal responsibilities shall be borne by yourself, and Party A will not bear any responsibilities.

There are many cars in front of the hotel. When walking or driving a vehicle, employees should enhance their safety awareness, be vigilant, slow down and travel safely. If Party B fails to comply with the hotel regulations and any accident or personal injury occurs in front of the door, I shall bear all the responsibilities, and Party A shall not bear any responsibilities.

8. It is forbidden for anyone to carry (such as controlled knives, drugs, explosives, inflammables, etc.). ) at the hotel. In case of unauthorized carrying in violation of the prohibition, the parties concerned shall bear all economic and legal responsibilities, and Party A shall not bear any responsibilities.

9. All employees must strictly implement the work operation specifications and workflow formulated by the hotel in their work and actual operation. If they don't work in violation of the operating norms stipulated by the hotel, causing accident losses, all the responsibilities shall be borne by the parties concerned, and the hotel will not bear any liability for compensation.

10. Employees staying in the hotel must abide by the dormitory management regulations, and personal accidents will occur under any of the following circumstances at their own risk.

(1) Employees climb, sit, ride and slide stair guardrails or buildings and facilities;

(2) employees lean out of the window;

(3) Employees have accidents due to drinking;

(4) Connect wires privately in the dormitory and use electrical appliances illegally;

(five) to stir up trouble and fight;

(6) Personal injury caused by personal illness and concealment;

(7) Employees who go out and don't come home on time, regardless of whether they go through the leave formalities, have personal accidents outside;

(8) Loss of personal valuables (cash) for personal reasons.

(9) Employees violate rules and regulations and cause other adverse consequences;

1 1. For matters not covered in this agreement, supplementary clauses can be signed. Supplementary clauses and annexes are an integral part of this agreement and have the same legal effect as this agreement.

12. This agreement shall come into force as of the date of signature by both parties. This agreement is made in duplicate, one for each party.

Party A: Party B:

Signature of the representative: signature of the responsible employee: (by handprint)

Year, month, sun, moon, sun.

Chapter II of the Security Agreement Party A:

Party B:

In order to do a good job in expressway's construction safety management, make the safety signs on the construction site conform to the standards, ensure the safety and order of the construction work, truly realize the standardized management of the construction site safety, effectively guarantee the driving safety, eliminate the hidden dangers of accidents, reduce road traffic accidents, and strive to be a construction management demonstration unit in expressway. Party A and Party B reached the following agreement through consultation:

I. Rights and responsibilities of both parties:

1. Rights and obligations of Party A

(1) Party A shall inform Party B of the provisions on "safe production and civilized construction". In principle, the resident office is responsible for making a complete set of construction safety signs (in line with the national industry standard JTGH30-20xx). After Party B completes the construction examination and approval, the road administration brigade will guide and supervise the setting of construction safety signs before the start of construction, and conduct acceptance after the setting is completed.

(2) Train the safety personnel assigned by Party B to the construction site, and put forward specific safety requirements for their duties, clothing and equipment.

(3) Party A shall conduct on-site inspection on the placement of construction safety signs of Party B.. The inspection standard is the floor plan of maintenance operation control area in Annex 3 of No.20xx24 document of Shihuang Management Office. If it is found that the construction safety signs are placed irregularly or seriously missing, the road administration brigade will issue a notice of shutdown and rectification according to the site conditions. If Party B fails to carry out the rectification notice, Party A has the right to clean up the site.

(4) Inform Party B of important matters such as instructions from superiors, bad weather and unexpected events.

2. Rights and obligations of Party B

(1) Party B must place and maintain safety signs according to the requirements of China people * * * and the national industry standard JTGH30-20xx "Regulations on Safe Operation of Highway Maintenance" and Ji Shihuang No.20xx24 "Regulations on Site Management of Shihuang expressway Maintenance Operation".

(2) Party B shall set up full-time security officers such as dry names according to the quantities, and shall not change security officers at will. Party B shall not take up his post until he has passed the training of the Road Administration Brigade. The safety officer of Party B is responsible for the placement of construction signs and the early warning of oncoming vehicles. If the sign is found to be damaged or lost, it should be reported to the relevant departments immediately, and the safety sign should be updated or supplemented in time to ensure safe construction. If Party A finds hidden dangers in the construction site, Party B must unconditionally accept the rectification and treatment by law enforcement personnel.

(3) After receiving Party A's suspension order, Party B shall not start work without Party A's resumption order.

(4) Party B shall regularly clean up the construction area, clean up garbage and sundries, and ensure the sanitation and neatness of the construction site. Construction personnel should dress neatly and strictly enter and leave the construction area.

(5) Construction vehicles shall ensure good performance. It is forbidden to repair machinery that is faulty or overloaded, and scrapped vehicles are not allowed to be used.

(6) Construction vehicles should try not to occupy the fast lane. If it must be occupied, it shall be implemented according to JTGH30-20xx "Safety Operation Rules for Highway Maintenance".

(7) Building materials are generally not piled up on the road. If it needs to be placed on the road, it must be approved by the maintenance department. The raw materials piled up on the road must be neat, and the bagged cement must be packed neatly and stamped. Cover should be neat and firm, waterproof and moisture-proof; Materials such as sand and gravel must be classified and stored neatly (piled into squares or rectangles), and signs indicating the types and specifications of materials should be placed. If necessary, cover with sand and gravel.

(8) Excavated old cement concrete, asphalt pavement and other sundries shall be cleared away in time, and shall not be piled up in the operation area or thrown into ditches, slopes and central separation zones. If it is found that construction waste and other sundries are discarded at will, Party B shall be ordered to remove them, or other units shall complete them after a fine.

(9) Party B shall not pollute the facilities along the road, markings, guardrails, etc. , and ordered the polluting units to eliminate pollution. Can not be cleaned up, in accordance with the road property compensation standards for compensation. (10) Party B shall prepare a vehicle for clearing obstacles and ensuring smooth traffic at the construction operation surface to prevent accident vehicles from blocking roads in the construction area.

(1 1) Party B shall carry out civilized and safe construction, and the construction personnel shall not cross or cross expressway. It is forbidden to intercept or take passing vehicles on the road, and it is not allowed to hinder the normal passage of passing vehicles.

(12) Party B has no right to charge any fees in the construction area or on the road. In case of signs, tools and materials placed by Party B being damaged by passing vehicles, it must be reported to the road administration department of the jurisdiction for handling according to regulations.

2. Party B shall be responsible for traffic accidents, economic losses and personal injuries caused by various problems existing in Party B's construction.

3. This Agreement is made in duplicate, with each party holding one copy. This agreement shall come into force after being signed or sealed by both parties. The project payment settlement will be automatically terminated.

Representative of Party A on behalf of Party B

Name: Name:

Year, month, year, month, year

Chapter III of the Security Agreement Party A:

Party B:

Through friendly negotiation between Party A and Party B, Party B is willing to become a full-time employee of Party A, and now the following agreement is reached on relevant safety matters:

1. Party B voluntarily joins the roller skating association, abides by its articles of association and accepts its management.

Two. Party B shall enjoy the corresponding rights and perform the obligations stipulated in the Articles of Association.

3. Party B is willing to abide by the following safety regulations:

1. Before practicing roller skating, Party B should be prepared, especially the joints and ligaments of the wrist and lower limbs, and fully move.

2. Party B must wear protective articles when participating in training and club activities, including wrist pads, elbow pads, knee pads, palms and roller skating helmets.

3. Party B shall check the fastening parts such as screws of roller skates before practice to avoid injury due to equipment problems during sliding.

4. Party B shall practice within the specified range, and shall not slide at will, or skate on slopes or on the ground with oil pollution and water accumulation, with safety as the priority.

5. Party B is forbidden to do actions that are dangerous or hinder others, such as several people sliding hand in hand, retrograde on the speed skating runway or retrograde in the sliding direction with everyone, scurrying around the stadium, chasing and slapping, stopping suddenly, etc. Party A is not responsible for any unexpected situation.

6. When participating in the outing activities organized by Party A, you shall not act without Party A's permission.

7. Party B shall not participate in any activities organized by Party A after drinking, fatigue or other similar situations.

8. The Association shall not be liable for personal injury caused by Party B or injury caused to a third party.

9. The National Roller Skating Organization considers it unsuitable to engage in roller skating activities in other circumstances, and may not participate in the activities organized by the Association.

10. Party B shall be responsible for the consequences caused by failure to comply with the above provisions, and Party A shall not bear any responsibility.

4. This agreement is made in duplicate, one for each party, and shall come into effect as of the date of signature and seal by both parties. The faxed copy of this contract is valid.

Party A and Party B: representative signature (seal): representative signature (seal):

Date of signature: year month day.

Article 4 of the Security Agreement Party A: (hereinafter referred to as Party A)

Party B: (hereinafter referred to as Party B)

Party A contracts the project to Party B according to the production needs, and the two parties reach the following agreement on safety management and safety responsibility for common compliance.

I. Scope of application of this Agreement:

1. This agreement is applicable to all on-site maintenance services contracted by Party B for Party A. ..

2. Project address: within the factory area, or the place specified in the order and contract.

3. The contract form of this project is order or contract, that is, this agreement is applicable to all construction orders and contracts signed by Party A and Party B in the future.

Two. Validity of this guarantee agreement:

It is valid for a long time from. If both parties sign an updated guarantee agreement in the future, the updated version shall prevail.

Three. Agreement content:

1. Party A and Party B must conscientiously implement the policy of "safety first, prevention first" and strictly abide by the laws, regulations and rules and regulations of the state on production safety.

2. Party A and Party B shall have safety management systems, including the person in charge of safety production, the responsibility system for safety production, the operating rules for safety production, and the safety education and training system.

3. The legal representative of Party B is an enterprise with the required safety qualification and the ability to undertake safety responsibility for contracted projects. And provide a valid qualification certificate.

4. Party B shall assign experienced and familiar personnel to be responsible for the safety of the project site and conduct daily safety inspection on the construction site. Party B's appointment and contact telephone number;

5. Before Party B's personnel take up their posts, Party A will give them factory safety training (validity period 1 year), and introduce the site hazards and Party A's safety regulations. Party B shall be responsible for the relevant safety education for the construction personnel of this unit.

6. Party B shall formulate targeted safety technical measures according to the characteristics of this project and provide them to the contracting-out department of Party A for review. At the same time, Party B shall make safety technical disclosure to the construction personnel of the unit and operate in strict accordance with the requirements of safety technical measures. Without safety education and safety disclosure, no one is allowed to enter the site for work.

7. When handling the factory certificate, Party B's personnel must provide a copy of the operation certificate of special operators to the Ministry of Security if special operations are involved.

8. Age regulations for Party B's personnel: Men shall not be over 60 years old and women shall not be over 55 years old, and no child or underage workers shall be recruited.

9. Party A shall always care about and urge Party B's work safety in production, and have the right to immediately point out and stop unsafe places and put forward rectification requirements. Party B shall rectify immediately.

10. Party B must provide its personnel with necessary personal labor protection articles (work clothes, safety shoes, gloves, safety helmets, safety belts, etc.). ) and urge them to wear it correctly; If Party B's employees cause serious work-related accidents or even death due to their own reasons, Party B's company shall bear all the responsibilities. Before the project starts, Party B must purchase accident insurance for the project to cover possible casualties. In case of death or serious disability caused by accidents during construction, the insured amount shall be no less than 250,000 RMB. If Party B fails to purchase insurance when starting work, Party A has the right to cancel the contract order or contract, and Party B shall bear all losses caused to Party A, such as delay in construction period.

1 1. Party B shall abide by the safety and traffic rules of Party A in the factory.

12. Party B shall ensure that the tools and equipment used are safe and operate in strict accordance with the operating procedures to ensure work safety;

13. Party B shall carefully check the tools and equipment provided by Party A before handing them over to Party B for use. After being put into use, it means that Party B recognizes that Party A's tools and equipment are safe;

14. Party B is engaged in special operations (electricity, gas welding, electrician operation, crane driver, scaffolding, climbing operation, crane, handling of dangerous, toxic and explosive articles, etc.). ), its operators must hold relevant certificates; Occupational health examination records shall be provided for toxic and harmful posts. Lifting operations must comply with the "Ten No Lifting" regulations, and illegal and unlicensed operations are strictly prohibited; It is strictly forbidden for people who do not understand electrical appliances and mechanical equipment to operate and use electrical appliances and mechanical equipment without authorization.

15. If Party B brings inflammable and explosive articles into the factory, it must report to Party A and get approval. Dangerous goods should be kept by special personnel and stored in a safe place, with preventive measures and safety warning signs. When all production sites are involved in power transmission, pipeline partition, hot work, container sealing, climbing, excavation, temporary power connection and other operations. , you must take the initiative to contact the management personnel in charge of the project in advance, apply for a safety work permit, and understand the on-site dangers and precautions informed by Party A. Party B has the right to refuse any unsafe work.

16. Party B's personnel can only smoke in the smoking spot designated by Party A. Party B's personnel can only work in the designated area, and are not allowed to enter other production sites at will, and are not allowed to build and touch running equipment without authorization.

17. Party B must strengthen the management of on-site personnel to prevent theft. Once any violation of safety is found, Party A has the right to decide whether to terminate the contract and impose penalties according to the seriousness of the case.

18. Party B shall conduct construction in a civilized manner, and shall not throw, roll or throw workpieces or materials at will. The working environment in the operation area should always be kept clean and tidy, and the generated garbage and waste should be cleaned up to the designated place in time.

19. Bamboo scaffolding is prohibited on the construction site. Party A and Party B shall not dismantle or change the scaffolding and various safety protection facilities, safety signs and warning signs on the construction site without authorization. If it is really necessary to dismantle and modify, it must be approved by the person in charge of the project and the safety management personnel designated by Party A and Party B, and necessary and reliable safety measures must be taken before dismantling. If any party's personnel are dismantled without authorization, the consequences will be borne by the party's personnel and their units.

20. Party A shall not assign Party B's personnel to undertake tasks outside the contract, and Party B shall refuse.

2 1. After the signing of this contract, Party B shall go through the examination and approval procedures for all projects that need examination and approval with the relevant administrative departments according to the regulations of the local safety production supervision and management departments.

22. Carry out the principle that whoever constructs is responsible for safety. After a major accident happened to the contractor, both parties should make concerted efforts with Qi Xin to rescue the wounded and protect the site, and make a serious investigation according to the principle of "four let-offs". Party B shall be responsible for the safety of its employees and subcontractors, and inform the subcontractors of the dangers at Party A's site.

23. In the construction site, because Party B violates the above agreement, or the safety technical measures are not perfect (the competent department of Party A is not contacted actively), or the contract is contracted out to no contractor.

If personal and equipment accidents are caused by qualified units or individuals, lax on-site supervision and management or violation of Party A's safety regulations, Party B shall bear all safety responsibilities. In other cases, the accident loss shall be settled through consultation according to the size of the responsibility.

24. For the punishment of the contractor's violation, see: Detailed Rules for the Punishment of the Contractor's Safety Violation.

25. The provisions of this agreement shall apply to both parties of the Association. If it is inconsistent with relevant national laws and regulations, it shall be implemented in accordance with relevant national regulations.

26. This agreement shall come into effect immediately after being signed and sealed by both parties. In triplicate, one for the contracting department, the contractor and the security department.

Party A: Party B:

Tel: Tel:

Date: Date:

Article 5 of the security agreement complies with Article 2, Item 2 of the Company's Opinions on Further Strengthening Internal Security Prevention; The injection molding factory employs its own security personnel to try out the self-management of internal security in the factory. In order to ensure the unity of the internal security management of the whole company, it can also play the role of hiring security personnel within the unit. In order to clarify the responsibilities and ensure the internal safety of the company, the following agreement is reached through consultation between the security department and the unit:

I. Management and responsibilities of security guards employed by the unit;

1, the employing unit should ensure the safety and pass the political examination, so that the relevant procedures are complete and can be used legally.

2. The hired security guards must abide by the company's administrative rules and regulations, especially the safety management system. Complete the assignment of security responsibility area.

3, the unit leader should be according to the requirements of the internal security work, clear job responsibilities of security guards, to do a good job in security and fire patrol as the main task.

4. The security guards are managed by the employing unit, and their tasks are not only led and assigned by the unit, but also supervised by the functional departments of the company.

Second, the company's safety management and responsibilities;

1, the company's security department shall perform its duties according to the tasks specified in the company's security rules and regulations.

2. Give relevant business guidance and work supervision to the security guards employed by the unit.

3, do a good job of coordination between units in the process of production safety, to assist the company or unit to deal with internal security issues.

Third, the division of responsibilities for public security and safety management;

South of the road center line of Building 3 and Building 4 of Huli Factory 1 (including the whole building 3) is the safety management responsibility area of injection molding factory. The area north of the central line is also under the management of the Ministry of Security.

2. The high-tech factory area shall be determined separately.

Injection Molding Factory: Security Department:

Date: Date:

Article 6 of the safety agreement: the construction (supervision) party: xx Co., Ltd. (hereinafter referred to as Party A)

General construction contractor: xx Co., Ltd. (hereinafter referred to as Party B)

In order to ensure the smooth completion of xx building decoration project, this safety agreement is specially signed according to the relevant regulations of the state and Beijing.

1. In order to implement the working principle of "who is in charge, who is responsible", Party B must conscientiously implement the Regulations of Beijing Municipality on Fire Control and Article 4 of the Government's Regulations on Fire Safety Management of Beijing Construction Sites (No.84 of XX Order): "The construction unit is responsible for fire safety at the construction site". Party A and Party B shall urge the construction unit to do a good job in fire safety. Party B shall set up a safety leading group to be fully responsible for the safety of the construction site.

2. Within three days after the signing of this agreement, Party B must report to the local public security fire control institution, and the public security fire control institution can only continue the construction after issuing the fire safety permit on the construction site.

3. Party B shall, within three days, go to the Beijing Fire Bureau to collect and truthfully fill in the Approval Form for Fire Safety on Construction Site of Beijing Construction Project and the Record Form for Fire Safety Audit on Construction Site of Beijing Construction Project, and report the construction organization design, fire safety measures on construction site, fire protection scheme and on-site security measures scheme to the municipal public security fire supervision institution for examination and approval.

4. Party B shall strictly examine the personnel stationed in the construction site, take full responsibility, do a good job in laws and regulations and fire safety education for construction personnel, and strictly abide by the safety regulations of Party A and Great Wall Hotel.

5. Party B shall sign a safety agreement with each subcontractor and team, and the professional construction team shall sign a safety agreement with each worker who enters the site. The fire prevention responsibility system should be implemented step by step in the construction site. Party B shall form a site safety team, formulate various safety systems and measures on the construction site and post them on the construction site to be responsible for the safety management on the construction site. Party A is responsible for supervising and inspecting the fire safety on the construction site.

6. After the construction unit comes off work every day, Party B shall keep certain security personnel to be responsible for the fire safety of the construction site. As Party B's safety inspector is not in place, once found, Party A will impose a fine of 100 yuan.

7. Party B is responsible for equipping the construction site with fire fighting equipment and facilities such as abc dry powder fire extinguishers, and the person in charge of fire prevention of Party B shall train the construction personnel on fire fighting knowledge and equipment use. The security department of the Great Wall Hotel can help ensure that personnel without safety training are not allowed to take up their posts. Otherwise, Party A will impose a fine of RMB 65,438+000 on the person in charge of Party B. ..

8. Before construction, Party B shall handle the construction pass for the construction personnel who enter the site. Construction personnel can only enter the construction site after wearing it, especially for special types of work.

9. The welding equipment used by the construction unit shall be checked and approved by Party A and the professionals of Great Wall Hotel before it can be put into use.

10, strict management of open flame operation during construction. Before hot work, the on-site fire management personnel of the Great Wall Hotel shall apply for the Hot Work Permit, and the full-time firefighters of the Great Wall Hotel and Party B's security personnel can only use open flames after they arrive at the site. Hot work personnel must first clean up the combustible materials and combustible materials on site, hold the operation certificate of special type of work, set up fire watchers and equip them with necessary fire extinguishers and buckets. Non-welder operation is strictly prohibited. Party A or the Security Department of Great Wall Hotel will impose a fine or other treatment on Party B according to the actual situation.

1 1. For inflammable and explosive articles that must be used in construction, a special person shall be appointed to be responsible, and a collection system shall be established for safekeeping. No littering or misplacing. In line with the principle of taking as much as possible, it is strictly forbidden to repackage, season, store and cross-work in the workplace.

12. The construction unit shall establish a strict management system for engineering materials. Materials entering and leaving the hotel have to go through strict procedures, and security personnel take the initiative to check. Party B shall organize its own strength to keep the materials and tools used in the construction site, and Party A shall not bear any losses.

13. Party A believes that there are major hidden dangers in the construction site and has the right to order it to stop work and make rectification. Party B shall be responsible for and bear the losses caused during the shutdown period and the delay of the project progress.

14, the construction unit must carry out safety education for the construction personnel, and conduct civilized construction according to the operation procedures. The construction unit shall be responsible for the injury accidents that occur during the construction.

15. During the construction period, if the construction unit fails to comply with the fire safety system, resulting in a fire accident, Party A will hold the parties and the person in charge of Party B accountable, and Party B will compensate all economic losses. Major accidents should be reported to the relevant departments for handling.

16. During the construction, if the construction personnel of Party B damage the fire-fighting facilities and equipment, they shall pay compensation according to the price. The compensation items are consistent with the models and functions of the existing equipment in the hotel; Intentional damage, in addition to compensation for goods, but also a fine.

17. If it is necessary to change the fire alarm equipment and fire water system during construction, it should be reported to the security department of the Great Wall Hotel one day in advance, and it is not allowed to move it without authorization. Otherwise, Party B's construction unit will be fined 200 yuan.

18, the provisions on the construction site are as follows:

All staff of 1 must wear a pass (badge), and those without a license are not allowed to enter.

You must wear a helmet when entering the site, and those who don't wear a helmet are not allowed to enter the site. Those who don't wear safety helmet after entering the site will be fined 100 yuan.

Smoking is strictly prohibited in the construction site, and both parties have the responsibility to check. Offenders will be fined RMB 100 for the first time, RMB 300 yuan for the second time and RMB 500 yuan for the third time, and will be expelled from the hospital. If cigarette butts are found on the ground of the professional team's construction site, both inspectors have the right to impose a fine of ten to fifty yuan on the professional team.

It is forbidden to urinate in the venue. Offenders were fined 65,438+000 yuan for the first time, 300 yuan for the second time and 500 yuan for the third time, and were expelled.

It is forbidden to fight, fight or drink at the scene, and offenders will be fined 100 yuan.

6. No mobile phones are allowed to be used at the site except the management personnel, and offenders will be fined 50 yuan.

7. The temporary electricity and water needed by the construction unit shall be submitted to the Engineering Department of Party B in writing and reported to the Security Department of Great Wall Hotel for the record; The electrician of Party B's engineering department designates the switchboard, and the power cord is connected by double sheath line. Party A and the Security Department of Great Wall Hotel will impose a fine of 100 yuan on the parties concerned and a fine of 200 yuan on the person in charge of construction. If losses are caused, Party B shall be responsible.

8 Unauthorized tools shall not be used on site. If necessary, use powder gun (nail gun), high-pressure gun, nail plug, cutting machine, etc. Party B shall apply one day in advance and obtain permission before using it. Offenders will be fined 100 yuan.

9 Special jobs require Party B to hold relevant certificates. If welding, blowtorch and other open flame operations are needed, the fire permit of Great Wall Hotel should be obtained in advance, and fire watchers and fire-fighting equipment should be equipped before entering the site for standard operations. Offenders will be fined 300 yuan, 1000 yuan for the second time and 5,000 yuan for the third time, and the equipment and tools will be confiscated.

10 Party B shall store the garbage on the construction site in the designated place and clean it up in time, otherwise 200 yuan will be fined.

19. During the whole construction process, Party B shall conscientiously implement the policies, regulations and provisions of the state and Beijing Municipality on safe production and civilized construction, and conscientiously implement the Technical Specification for Safety in Building Construction and the Beijing Municipality's Safety Operating Procedures for Building Engineering Construction; Adhere to the "five simultaneities" of safety work, that is, "plan, arrange, check, summarize and evaluate" the safety work at the same time. Really put prevention first, nip in the bud.

20. Party B shall conscientiously implement the Regulations of Beijing Municipality on Construction Engineering Supervision and related regulations, carry out the work in accordance with the construction supervision procedures in the whole construction process in the future, take seriously the rectification requirements put forward by Party A (the supervisor), timely rectify and eliminate the problems raised in the supervision notice and meeting minutes, and earnestly do a good job in pre-control and process control of all work (including safety work).

2 1. This agreement is made in triplicate, with each party holding one copy.

Party A's unit (signature) and Party B's unit (signature)

XX year 65438+ October 30th XX year 65438+ October 30th.