How to replenish water for wall-hung boilers in Wieseman

First, determine the unit of the pressure gauge of the wall-hung boiler. If the unit is bar, the pointer of the wall-hung boiler should be between 1-2 when replenishing water. If the unit is Mbar, the pointer of the wall-hung boiler should be between 0. 1-0.3 when replenishing water. Turn off the household gas wall-hung boiler and cut off the power supply, so that the system is in a closed state;

1. Find the makeup valve at the bottom of the household gas wall-hung boiler and turn it counterclockwise.

2. When the system starts to replenish water, closely observe the water pressure gauge. When the water pressure returns to 1.5 bar, turn the valve clockwise to end the water replenishment.

Extended data:

Under normal circumstances, the water replenishment cycle of domestic gas-fired wall-hung boilers is once every six months. If the gas wall-hung boiler at home is always replenished every few days, it means that there is water leakage in the system, and it is necessary to contact the maintenance personnel of Weissman wall-hung boiler in time for on-site inspection.

If the water leakage problem is not solved in time, but replaced by frequent water supply, the gas-fired wall-hung boiler will easily form a large amount of scale, blocking the circulating pipeline and the main heat exchanger, leading to the decrease of the efficiency of the heating system and eventually damaging the components. At this time, the maintenance cost of wiesmann wall-hung boiler will become higher, which is not worth the loss.