How to do European Roman column home decoration better?

Roman columns often give people an elegant impression. When it comes to it, everyone will think of the Colosseum in Italy and Rome. In fact, with the improvement of our quality of life, the house we live in is becoming more and more luxurious, and many friends will choose to install Roman columns when decorating. But in fact, there are many places to pay attention to in the decoration of Roman columns. You are also curious about decorating Roman columns in your house. Next, let's meet them with Bian Xiao's introduction.

What types of Roman columns are used for house decoration?

The proportion of Doric Doric column is thick and gradually decreases from bottom to top, and the height of the column is 4-6 times of the bottom diameter. The pillar is engraved with a concave circular groove and the back is angular. The stigma is relatively simple, and there is no pattern. The cornice height ratio of directly standing on the abutment without column foundation is 1: 4, and the column spacing is about 1.2 to 1.5 times that of the column maker.

Love Onek pillar This pillar is slender and light, full of exquisite carvings. The column is long, thin at the top and thick at the bottom, but it has no radian. The groove of the cylinder is deep and semi-circular. The upper column head consists of a decorative belt and two connected large round scrolls, and the scrolls are provided with vertical lintels on the roof. In short, it gives people a relaxed, free and beautiful femininity.

Corinthian order may have first appeared in the temple of Zeus on Mount Olympus in Athens. There are scroll decorative patterns on all sides, and there are two rows of leaf ornaments on all sides, especially pursuing fine symmetry, which is very gorgeous and slender.

The smooth columns of GRC Roman columns give people a very clear and atmospheric feeling in architecture and are generous. The unique Roman decorative lines of linear columns are simple and lively, revealing ancient civilization and giving people a sense of patchwork.

Taurik column is a kind of column without column base, which is placed directly on the stone bench and built by a series of drum-shaped stones. It is relatively heavy and magnificent. The surface of the cylinder is engraved with continuous grooves from top to bottom, and the number of grooves varies from 16 to 24. It originated from ancient Egypt, and the pre-Taulick order named by famous French Egyptian scholars was the pioneer of this Greek order.

How to install non-load-bearing hollow Roman columns?

1) First of all, solder joints should be embedded in the column installation position, brick or concrete.

2) According to the inner diameter of the Roman column, the angle steel is welded into a tripod as the inner keel, and the lower part is welded firmly with the underground embedded parts, leaving space above, and the tripod can be connected with the installation.

3) Place the column foundation and the column body on the keel, correct the position of the groove, then connect some welding spots buried on the upper surface of the column body of the column foundation with the steel bars on the keel, and install them vertically in the groove section by section in turn until the last column body.

4) The stigma consists of two halves, and the triangular keel is connected with the built-in parts and welded to death. Then, first assemble the head and the first half of the stigma, and all the solder joints at the joint are welded to death.

5) Finally, all joints are treated with cement until smooth and flat.

The above is a detailed introduction about the Roman column of house decoration. After reading the above, we know that Roman columns are effective and many friends like them very much. In fact, the Roman column of house decoration can bring great influence to intensification. Each European-style Roman column has its unique advantages and uses. I hope everyone can better apply European-style decorative Roman columns according to Bian Xiao's introduction.