Ball width

A more important part of bathroom decoration is the size and installation of the sink. Why is it inconvenient for many friends to use the sink every time after they check in? Back pain, water leakage and splashing are common things. It can be clearly said that most of these problems are the size and installation of the washstand in the bathroom. When measuring the room, the owner did not fully consider these details, and the reserved position was not enough. Finally, the size of the washstand or brick washstand is not suitable for the height requirements and use needs of the family, which will lead to a lot of inconvenience in use.

Ordinary size

1, the size of the sink has a minimum standard, the minimum width should not be less than 550mm, and one side is 600 mm. In order to save space, some collective toilets reduce the sink to about 300mm, but even if they do this, it is impossible for the washbasin to be only 300mm wide, which is not convenient for putting things, so the width of the sink should be greater than or equal to 550mm, which can be increased according to the actual situation, but it must not be less.

2. Another key is to leave a gap of 550mm from the center of the washbasin to the walls on both sides, that is to say, leave a gap of 1 100 to place the countertop, otherwise it will be awkward to use, and we can synthesize everyone's opinions. In order to save money, some people don't even need a washstand, but need a floor-standing washbasin.

3. However, a commonly used size is the basin under the table: the desktop is 850mm, and the basin above the table is 750 mm. This size is the standard size of the bathroom sink, but we can look at it according to our actual situation. If the average family height is relatively high, of course, it should be designed to be higher. If the average height of the home is not very high, it is recommended to install the bathroom sink lower.