Teach you how to use hotel dust push correctly, and teach you how to use hotel dust push correctly.

1. Before use, unfold the dust pushing cover, and spray the electrostatic dust absorbent (also called dust pulling oil or dust pushing oil) evenly on the fiber surface of the dust pushing cover for 2-3 times with a watering can (make sure that the dust pushing cover must be washed and dried, of course, it is not necessary to be new).

2. After spraying the electrostatic dust catcher, fold the dust pusher cover and put it away. After 4 hours, the electrostatic dust catcher completely penetrates into the fibers of the dust pusher cover and can be used.

3. Push the dust in a straight line, starting from one side first. The dust can't be pushed away from the ground and can't be dragged back and forth.

4. When pushing the dust, each row of the dust pushing cover should overlap by 1/4 to prevent leakage and rubbing.

5. When the dust pusher is covered with dust, push the dust onto the trash can and brush it with a brush before using it until the ground is completely clean.

6. The dust pusher loses its dust adhesion ability, so it should be treated with the dust pusher treatment liquid again before it can be used.

7. When there is water stain or stain on the ground, clean it with a rag or toilet paper first, and then use a dust pusher for cleaning and maintenance.