Can the electric car be pushed after the motor lock is locked?

If the motor is locked, it cannot be pushed. The motor lock uses the motor lock function of the rear wheel brake of the electric vehicle. The motor lock is a mechanical lock. Once locked, the motor can't turn, and the rear wheel can't turn whether it is electrified or pushed. If it can be rotated, there is a problem.

All rotating parts shall operate flexibly and shall not be stuck or stiff. For example, the front and rear wheels should rotate flexibly, and they should not swing from side to side or jump up and down. When the wheel is about to stop, it should be able to swing back and forth briskly, and it should not stop suddenly. The handlebar should rotate freely from left to right, and the pedal shaft and crank should be fastened, and they should not loosen each other and rotate flexibly. Pay attention to maintenance.

Extended data:

Pay attention to maintenance matters:

Check whether the rotating parts: front and rear wheels, pedals, cranks, sprockets, chains and flywheels are operating normally and whether there is foreign body friction. Check whether the tire pressure is appropriate.

Speed regulation is stable and reliable. Turn the speed control handle slowly, and the motor should start and accelerate smoothly. After releasing the handle, the handle can be quickly reset and the motor will decelerate evenly.

Brake power failure is fast and reliable. Turn the speed control handle. After the motor is running, tighten the brake and the motor can be powered off immediately. If there is a power display, you can see that the display is zero.

Electric vehicle-Baidu encyclopedia