Which consumes electricity, time-lapse video recording or parking monitoring?

Time-sharing video recording and parking monitoring both consume electricity, and the driving recorder 1000 hours consumes about 2 degrees. Generally, driving recorders with time-delay video recording function will be equipped with parking detection function. When the parking detection function is turned on, the delayed video recording will be turned on, and the recorded video can be continuously detected without using the car.

Both time-delay video recording and parking monitoring can supervise vehicles, but relatively speaking, time-delay video recording consumes more power. Shortening video recording time is a photography technique to shorten long video recording time. The key design principle is to turn a long video into a short video with a quick posture, just like the quick play function in a movie, and turn a long video into a short video.

Among the installation options of time-reduced video recording, there are several options, which are 8 hours, 16 hours and 24 hours respectively. If 8 hours is selected, the video recorded by the driving recorder will be reduced to 8 hours after the vehicle leaves for one day. In other words, during the whole shutdown process, the shortened video is the monitoring and maintenance all day.

Parking monitoring will only run video when the vehicle is magnetically induced to vibrate, and it will go to sleep again after no more than 15 minutes, and it will be in standby state when the vehicle is magnetically induced to vibrate. In other words, parking monitoring is not full-time supervision, of course, video also consumes electricity.

What is time-lapse video?

Time-reduced video recording, also called time-delayed video recording, is a shooting technique to shorten the long video recording time. In fact, it is to turn a long video in slow motion into a short video in fast motion, similar to fast-forward playback in movies. The video it shoots is played in the form of video through later frame extraction, which compresses the process of minutes, hours or even days and years in a very short time.

Generally, the time-delay video recording function needs to connect the normal electricity of the car with a step-down cable, that is, connect the battery. It is certainly very power-consuming to continue to detect the video recorded by the car without using the car, which will consume the power of the car battery to a certain extent. However, the power consumption of the time-lapse video recorder is not large. If you use the car frequently, the power consumed by the battery will be replenished during the use of the car, which is generally no problem within one week.

Time-saving video recording can ensure the integrity of recorded content and greatly save storage space. Generally, 24-hour recording only needs about 5G of memory space, which can monitor and protect the car all day to some extent. If you don't use the car often, long-term video recording will cause excessive battery consumption, which will lead to the failure of the car to start normally. In fact, the start time of time-delay video recording of driving recorder depends on personal needs and driving frequency. If you drive frequently, you can choose to turn on the time-lapse video, so that you can monitor and protect the car all day. If you don't drive often and the car stops for half a month, it is not recommended to open a delayed video, which is not good for the car battery.

Does the parking monitoring of the recorder cost electricity?

Recorder parking monitoring does not consume electricity. Because the parking monitoring of the recorder is not started continuously for 24 hours, it is in standby state in most cases. When the vehicle magnetically senses the vibration caused by the impact of external force, it will automatically switch on and off and enter the shooting mode. After shooting _ no more than 15 seconds, it will enter the dormant state again, so the parking monitoring of the recorder is particularly power-consuming. And in general, the parking monitoring of the recorder must match the application of the step-down line, which has the functions of low voltage maintenance and uninterrupted parking monitoring.

However, when the vehicle has an uninterrupted power supply system, the parking monitoring function will consume battery power, and the vehicle will be put on hold for a long time, which will lead to battery loss and ignition cannot be carried out.