The company wants to make a product photo album, the product is a drag board and the like, and the SLR is already in hand. What equipment and equipment are needed, and what should be paid attention to

The company wants to make a product photo album, the product is a drag board and the like, and the SLR is already in hand. What equipment and equipment are needed, and what should be paid attention to in the set? First, the equipment. As long as the camera is a SLR, Quan Huafu is the best. The distortion of the lens should be small. If you often shoot equipment of this size, you can consider a 50mm or 80mm fixed-focus lens.

Second, a tripod is necessary. Fix the camera on a tripod.

Third, background documents. The paper surface of the background paper is rough, which will produce diffuse reflection. The color of the background paper can be selected, such as monochrome, gradient, color, pure black and white, etc.

Fourth, the workbench for placing items. If you often shoot, you can buy a writing desk, use an art easel as a bracket, and tile the background paper.

Fifth, lighting. In the picture above, you can see the shadows left by three kinds of diffused light. On the camera, there is main diffuse light on the left, and there are two diffuse light shadows under the frame for shaping. The diffusion effect of shadow is smaller than that of main light, and the intensity of two diffused auxiliary lights on the left side of the picture is also different. The shadow is bigger and the light is slightly stronger. The shadow is small and the light is slightly weak.

Sixth, seats. The height of the camera is almost equal to the height of the object, but a higher height will make the shadow effect better.

Seventh, camera settings. It is recommended to use full manual shooting, including: white balance, sensitivity, focus, aperture, shutter speed and metering. Average metering is possible, because there is no stray light in a scene like this, and the reflection of the light object itself does not change much.

1, white balance. Determine the overall tone of the photo. The above picture is slightly red and yellow, which can be set consciously.

2. sensitive. 200 degrees is enough. If you want to be more delicate, you can consider reducing the sensitivity within the adjustable range of the camera.

Step 3 focus. The focus can be selected by single-point focusing, but to know the depth of field of the lens at what aperture and to have accurate depth of field control, the background can be blurred and the whole article can be kept clear.

4. aperture. If it is a long lens, you can consider shooting with a long lens, a small aperture and a slow speed, so that the light can better depict the object.

5. Shutter and metering. If you often take such photos with a lens, it is suggested to first explore the depth of field of this lens and record the depth range under the same lighting conditions, and then look at the shutter and metering, and measure the exposure accuracy through the shutter and metering standards. The method is: by adjusting the shutter speed, adjust the exposure on the basis of the standard, and check which photo is the effect you want most.