There is a bad smell in the kitchen sewer. How should it be removed?

First, scalding the inside of the pipeline with hot water is likely to help reduce the oil pollution in the sewer, which is also a very clever method.

Second, use cooked baking soda powder and high concentration vinegar. First, pour a proper amount of cooked baking soda powder into the sewer, and then pour a proper amount of high-concentration vinegar. When baking soda reacts with vinegar, sticky things such as grease can be removed from the pipeline.

Third, baking soda and salt can remove the odor of sewers. The ratio of baking soda to salt is 1: 2. Pour the mixture into the sewer and flush it down with a bowl of hot water.

Fourth, a big reason is that the joint between the sewer pipe and the underground sewage pipe of the vegetable basin is not well sealed, which leads to the odor at the joint. In this case, just find an electrician to seal it with tape or glass glue as soon as possible.

First, if the head of the kitchen sewer is blocked, it is usually more likely to be blocked by debris, so we need to clean up the debris in the sewer. You can use a long-handled pickup to reach into the sewer to pick it up, and clean it while draining, which is helpful to dredge the sewer.

Second,? If the sewer is still blocked after the large debris in the kitchen sewer is removed, you can find a slender iron wire to take out the debris hook in the pipeline. You can unscrew the corner cover of the sewer pipe, then pull the fine iron wire out of the corner after passing through the lower outlet, and pull it up and down repeatedly, so that the kitchen sewer pipe can be unblocked.

Third, you can put one end of the pipe dredge into the pipeline of the underwater channel in the kitchen, and open the water tank to drain water while rotating the dredge. If the sewer can be successfully launched after repeated dredging, it shows that the pipeline has been successfully dredged.