The indicator light of the Internet sports camera flashes red. What does fluorite S 1 mean?

1. Power failure: Due to power failure, the power light of the monitoring equipment is always red. Replace the power supply or contact the manufacturer's customer service for maintenance. Network connection problem: If the network connection of monitoring equipment is poor or fails, the power light will always be red. Check the network connection, reconnect the network or reset the router.

2. The flashing red light indicates that the camera is set incorrectly and cannot be used normally. A red light means that the camera is out of order, and a green light means that everything is all right. The infrared lamp of the camera keeps flashing to indicate the WiFi status to be configured, and it will stop automatically after 5 minutes. Therefore, it is necessary to reconnect the wireless for configuration to ensure that the distance and intensity of the wireless signal are within the range of 10 meter.

The red light of fluorite camera is always on. There may be the following reasons and solutions: the device is offline: the camera loses connection with the server, which may be caused by abnormal equipment or network. Solution: Check whether the network connection is normal, try to reconnect the device, or try to restart the router or camera.

4. Check that the extension cord of the camera power supply is too long, the output voltage and current of the adapter are insufficient, the camera power supply is insufficient, and the red light is always on. If it can't start normally, please check whether the power supply voltage and current of the camera meet the requirements, and then try again.

5. The camera's red light has two meanings: it is the camera's power indicator light, which will light up after the camera is powered on, indicating that the camera's power supply is successful. If the camera is normal, it is a selfie.