Use of Flash in Jinbei Studio

Flash is usually used with all kinds of lights in the studio. The flashlight is installed on the camera, and the band receiver is connected with other flashlights. Its main purpose is not to limit the practicality of the flash, which can make more effects and make the flash and ambient light in the photo more natural.

Lamps use soft light, which can be used like ordinary lamps when plugged in; The flash lamp shall be equipped with a flash lamp bracket and an umbrella; One end of the flasher is inserted into the hot shoe on the top of the camera, and the other end is inserted into the flash.

First of all, a set of flashers or connecting wires should be configured to use the studio flash. Secondly, because the color temperature and service life of each tube in the flash may be very different, it is necessary to determine a main lamp, and we should focus on the selection when turning on the flash.

It's hard to help you without specifying which one to use. I guess you use wireless sensing. Just connect the transmitter to the camera and set the flash to induction mode.

Both the flasher and the flash have channel setting options. Make sure that the distance between the flasher and the flash is far enough. Check the battery charge of flasher and flash lamp. Try different settings.