How to replace the Canon mf243 bracket

1. Unscrew the two screws at the back.

2. Remove the right side cover. There are no screws on the side cover, only buckles. Be careful to remove the bottom first, and then the top. The buckle in the middle of the top is the most difficult to remove. You need to pull the bottom first and use a screwdriver. Press up on the buckle in the middle, and then pull it out.

3. Remove the left side cover in the same way.

4. Unscrew the top cover screws.

5. Remove the top cover connecting rod latch.

6. Press out the buckle on the lower right corner of the front cover.

7. Press out the buckle at the lower left corner of the front cover.

8. Remove the front cover.

9. Turn the top cover back.

10. Remove the top cover.

11. Take out the back cover.

12. Complete the disassembly. If there is paper jam, you can see it now. Just remove the jammed paper fragments