Solution to the problem of wall foaming

The problem of foaming on the wall is a headache, but don't worry, I have a solution! When the wall foundation is dry without floating ash, the foaming problem can be easily solved by brushing the interface agent.

Solve it yourself

If you want to solve it yourself, you can buy finished putty powder. However, it should be noted that some putty powder may not be mixed with enough glue, which makes construction difficult. To avoid this, you can add some glue.

Matters needing attention

The big wall fell off? Use plastering gypsum to level first, and then blow putty, but avoid blowing too thick. Be careful when cleaning closed walls and wet alkali-resistant areas.

Putty scraping skill

After the putty is evenly mixed, scrape it on the wall several times, and compact each layer to avoid foaming. If bubbles appear for the first time, as long as they are crushed, a large area of bubbles will be removed by a shovel and smoothed with new putty.

Mabel at the Wheel

Finally, the bubbles are removed and dried. After fixing, re-polish the material, and the wall will be completely new!