How to use Casio camera

1, battery charging.

Pay attention to charging the camera before use. Generally, the purchased cameras are non-rechargeable, and they need to be recharged before use.

The specific charging method is as follows: firstly, align the anode and cathode of the battery with the anode and cathode of the charger, and then put the battery into the battery charger; Then plug the charger into the household power outlet. It takes about 240 minutes to fully charge. After the charging is completed, the corresponding indicator light will go out. When it goes out, disconnect the power supply and take out the battery.

(When the red light is on, it means charging; When it flashes, it indicates charging failure; When it is off, it means it is fully charged).

Use the charger that comes with the camera when charging, and cool the battery before charging. When charging, the camera may interfere with the radio, TV, etc. So try to stay away from these appliances when charging.

2. Charge the battery.

First, open the back cover, slide the battery back cover in the opening direction, open the battery back cover, then put the battery in it, press the battery onto the lock catch and fix it, and then cover the back cover.

3. Memory card.

Although the modifier has memory storage for storing images and animations, you still need to buy an expansion card because this camera is not equipped with a memory card. The memory cards supported by the camera include SD memory card, SDHC memory card and SDXC memory card.

Because after installing some memory cards, the shooting and storage speed of the camera will slow down, and some serious problems will lead to the inability to store high-quality animations correctly, so in order to avoid this kind of thing, we must use ultra-high-speed SD memory cards.

4. Take a snapshot.

(1) Aim the camera at the subject. If smart mode is adopted, there will be words at the bottom right of the screen to explain the shooting type, and you can zoom the shooting according to the actual situation.

(2) Press the shutter button halfway to focus the image. When the focus is completed, the camera will make a sound, and the back light spot will turn green, and the focus frame will turn green.

(3) Keep the camera still and press the shutter button, so that you can take pictures quickly.

Extended data:

Precautions for using Casio camera:

1, master the correct operating procedures. ?

We must strictly follow the operation steps in the manual. When replacing the battery and memory card, be sure to turn off the power switch of the digital camera, otherwise it will easily break down.

When downloading the images from the digital camera to the computer, it is necessary to connect the digital camera to the computer with wires, and the digital camera must be turned off before the connection, so as to avoid damaging the digital camera by live operation.

On the basis of mastering the correct operating procedures, generally speaking, there are three taboos in the use of digital cameras:

A taboo, high temperature and high humidity environment. For example, don't store the camera in a car exposed to the sun for a long time in midsummer, and don't put it in the camera bag immediately after use in rainy days, otherwise water vapor will enter the lens and camera, and it should be ventilated and dried in time before storage.

The second taboo is the erosion of dust particles If humidity is the number one killer of digital cameras, then dust is the number two killer of digital cameras. Once image sensors such as CCD fall into dust, dust particles will form black spots in the fixed position of each image taken later, even if they can be disposed of later, it is very inconvenient. ?

Three taboos, shock and vibration injuries.

2. Maintenance of image sensor.

Image sensor is the core component of digital camera imaging. For ordinary pocket digital cameras that can't change lenses, the image sensor is not exposed, and it is packaged in the digital camera, so it doesn't need to be maintained deliberately.

For digital SLR cameras that need to change lenses frequently, the image sensor is located behind the reflector. If dust enters the camera body, it is very easy to fall on the image sensor. Therefore, when replacing the lens of a digital SLR camera, the lens ring is installed downward to avoid dust from entering.