About Sony -T 10, the photos are not clear.

First autofocus

Hold down the shutter slowly

The image on the LCD screen is very clear.

tripping

It's gonna be okay.

If the distance is close, turn on the macro.

adjust the distance

Cause 1: camera shake at the moment when the shutter is pressed.

Solution 1: A, use the camera self-timer function, set the camera to shoot automatically for 2 seconds or 10 seconds, select the shooting angle, gently hold the camera, keep your elbows hanging, and ensure that the camera does not shake. B, use a tripod, so it is not easy to cause camera shake.

Reason 2: The shooting distance exceeds the focal length range of the camera itself. For example, the minimum focal length of my camera is 4cm, and the lens will appear blurred when it is less than 4cm away from the subject.

Solution 2: Macro. This method requires the camera to have macro shooting function. I suggest everyone use this function. The specific settings need to be carefully studied in the camera manual. For example, Canon cameras basically have macro prompt function, and half shutter cameras will have a viewfinder (frame). If the lens is within the focal length range from the subject, the viewfinder will be green; If there is a yellow frame, it is out of focus at this time, so the photo will be blurred. The macro function can reflect the truest side of the product, and capture the most vivid and attractive moments of the product from the camera LCD screen with your own eyes.

Reason three: there are too many manic points. Please look at the photo of pink diamond above. This problem is caused by the high use of ISO photosensitivity. Just adjust the ISO to around 100. If ISO is lowered, the corresponding shutter speed will also be lowered, which is prone to the problem of blurred picture caused by slow shutter speed. The solution to this problem is to make full use of lighting. At this time, the soft light studio and photographic lights will play a role, which can solve the problem of insufficient and uneven indoor shooting light.

Reason 4: The shutter speed is too slow. One solution is to increase the light and speed up the shutter speed; Another way is to lower the aperture and speed up the shutter speed, but the adjustment of the aperture depends on the specific product, and it is no problem to adjust the aperture slightly for things like trinkets.

Reason 5: The product is too small:

This problem is directly related to the focal length. For a camera with macro function, please refer to the macro usage method above. A camera without macro function can shoot close to the subject at different distances until it is blurred, and then the nearest shooting distance can be determined. If you practice this method more, you will feel it.