In solidworks, how can I animate a camera and make the view change with moving parts...

1. Here we take a house as an example. First, make all supporting furniture, as shown in the picture, and render the material color.

2. Assembly and placement, the final effect is as shown in the picture, the position constraints can be adjusted by yourself, and you can also change the room design by yourself.

3. Based on the plane under the window, draw a curve sketch as the camera’s route, and adjust the viewing location according to your own needs.

4. After completion, insert an auxiliary block to constrain the top plane to coincide with the lower plane of the window. The distance from the midpoint of the block to the vertex of the curve is 6700 mm. This number is adjusted according to the length of the line segment you draw.

5. Add advanced coordination, select the midpoint of the block connection line and the drawn curve, set the constraint to path coordination, set it to "change with the path", and set the yaw control to the Z axis.

6. Select Add Camera, right-click to edit the camera, use the front midpoint of the block as the target position, and the back midpoint as the camera position.

7. Click on the motion calculation example, pull the time bar to 9 seconds, and set the distance from the midpoint of the constraint block to the end of the curve to 0. Calculate after completing the operation.

8. Click play and the camera starts to move along the curve.

9. Save the animation and play it with video software. The effect is as shown in the figure.