How to connect Skyworth SK-A292 network camera to the TV

The method of connecting the camera to the TV is as follows:

1. In the POE monitoring system, since there is no need to lay additional power lines for the camera, the spoe switch is not only responsible for power supply, but also for the network connect.

2. Then there is the installation of the bracket. Generally speaking, it's almost the same. Most of them are directly locked with screws and installed above the monitoring position according to the actual situation.

3. After the camera is installed, connect the lines. spoe technology makes connecting easy. There is only one network port.

4. If installed outdoors, it is strongly recommended to use a waterproof kit.

5. Here, specify the LAN2 port of the SPOE switch and connect it to the LAN1 of the router with a network cable.

6. After the switch and router are connected, when the router can be connected to the external network, use a network cable to connect the LAN1 port of the spoe switch to the network port of the hard disk video recorder.

7. In this way, after powering on, the device will automatically scan for cameras on the network and automatically connect online. Remote viewing is possible with simple setup as long as the corresponding application is manually installed.