How to connect the mobile phone to the wireless camera?

1. yoosee, Android and Apple can be downloaded and installed on the mobile phone. The software needs to be registered and can be used after registration.

2. After the camera is plugged in, wait for a period of time, and the camera will send out a voice prompt waiting for connection. At this time, open the mobile phone software and select Smart Connect.

Note: When connecting, please make sure that the camera and the mobile phone are in the same wireless network, otherwise you will not be able to connect.

3. According to the software prompts, enter the WIFI password, connect, and enter the device password after the connection is successful.

Note: The initial password of the device is 123.

4. Click on the interface at this time, and you can watch it remotely on your mobile phone.

Extended data

principle of operation

Wireless camera is a new type of surveillance camera which embeds wireless receiver into network camera. It uses WIFI channel and conforms to the IEEE 802. 1 1B/G standard protocol. WIFI is a wireless network composed of AP (access point) and wireless network card. AP is generally called a bridge or an access point. As a bridge between traditional wired LAN and wireless LAN, any PC with wireless network card can share the resources of wired LAN or even WAN through AP.

Its working principle is equivalent to the hub or route with built-in wireless transmitter, and the wireless network card is the client device responsible for receiving the signal transmitted by AP. With AP, wireless workstations can connect to the network as quickly and conveniently as switches or routers in general wired networks.

In short, when one end of the switch is connected to a wireless AP or wireless router, and one or more wireless cameras are installed in the signal coverage area of the wireless AP/ wireless router, a simple wireless video monitoring system is formed, audio and video display and management are realized by computers in a local area network (wireless network or access switch), and control signals of PTZ are also transmitted wirelessly. If the wireless AP or router is connected to the Internet, remote audio and video monitoring can be realized through the dynamic domain name resolution and port mapping of the wireless camera.