Ground glass photography

Glass partition, hard and fashionable, adds a touch of bright color to your space. If you want to create a perfect glass partition, then the following steps will definitely help you.

accurate positioning

First, mark the position of the partition wall on the ground according to the installation positioning control line of the partition wall, and then mark the position and height line on the wall and column by vertical line. For framed glass partitions, don't forget to mark the vertical frame spacing and the location of fixed points.

Clever blanking

Secondly, it is necessary to blank the framed glass partition profile. First, check the actual size of the site, and then draw the track position line of the connection part and install the dimension line on the mullion to ensure that the installation position of the connector is accurate and the track is on the same horizontal line. Use a special tool (copying cutter) to make the incision smoother and neater.

Frame installation

Next, the frame installation of aluminum alloy glass partition wall is needed. There are two ways to install the frame of aluminum alloy glass partition wall. Small-area partition walls can be installed integrally after prefabrication on the ground; Large-area partition walls directly fix profiles on walls, floors and roofs. When installing angle aluminum parts, punch holes first, then fix the position with small profiles, and finally drill the same holes with a hand drill and fix them with self-tapping screws or rivets. The frame can be fixed on the wall and grounded with iron sheets.

Border installation skills

When the frame of the glass plate partition is a ladle veneer, it is necessary to try to install the frame steel first, and then weld it firmly with embedded iron pieces or metal expansion bolts after checking that it is correct, and then weld the frame profile with the frame. Before installation, anti-corrosion treatment is required.

Installation of large area glass partition wall

For the large-area glass partition wall, when it is installed by hanging, it is necessary to make a support frame for hanging glass under the beam or plate of the building structure, and install the fixture and upper frame for hanging glass. The distance between the fixture and both sides of the glass is 1/4 of the width of the glass (or according to the design requirements). Ensure that the bottom surface of the upper frame is flush with the ceiling elevation.