What is the nominal current and voltage of 500max optical diagnostic instrument, fluoroscopy machine and filming machine?

Product name: 500mA X-ray machine (monolithic tube)

Product introduction:

Component name k b-500 x- Performance parameters of X-ray machine

Performance characteristics: 1) 500mA monolithic tube, 125kV. 2) This machine is equipped with X-ray tube capacity protection, automatic compensation of kV and automatic stabilization of mA, which ensures the long-term safe operation of X-ray tube and improves the accuracy of kV and mA. 3) The diagnostic bed has a large rotating range, movable bed surface, many spot specifications, convenient operation and use, sufficient protection for primary radiation and scattered radiation, and ensures the safety of operators and examinees. . 4) The machine has reliable performance and is suitable for X-ray fluoroscopy, spot photography, gastrointestinal photography, line filter photography and chest photography in hospitals and scientific research units at all levels.

The power supply voltage of the high voltage generator is 380 V 10%.

Frequency 50Hz

Capacity ≥ 32kVA

Internal resistance ≤ 0.3 ω

The current of the fluoroscopy tube is continuously adjustable between 0.3 and 5 mA.

The tube voltage is 50- 1 10KV and can be adjusted continuously.

The current of the camera tube can be adjusted between 30-500 mA.

The tube voltage is 45- 125KV, which can be adjusted continuously.

The exposure time is 0.02-5S ***25 steps adjustable.

X-ray tube assembly X-ray tube model XD5 1.20-40/ 125kV

Focusing bifocal 1× 1 2×2

The rated speed of the anode is 2800 rpm.

Beam limiter YS09D diagnostic bed: electric, rectangular irradiation field.

C 15 bed rotation of diagnostic bed-15? - 0? - +90?

The longitudinal head-end travel of the bed surface is 700mm, which is electric.

The distance between the focal stage and the platform is 400 mm.

The point device moves up and down by 560 mm.

Move left and right 100 mm

Move back and forth 300 mm

The shooting specifications of the whole film are 5 "× 7 ",8 "×10",10 "×12",1"×14 "and 8 "×14".

Locking mode electromagnetic braking

(Optional) The lifting range of LSJ BuckyWall Stand is 1450 mm.

The center of the camera is at least 380 mm from the ground.

Photographic specifications, various specifications

The grid density of the grid (Korea) is 40L/cm.

Gobi 10: 1

Convergence distance 180cm

Registration configuration table

Serial Number Component Name Quantity

1 KB500 console 1 (piece)

2 6G high voltage generator 1 (parts)

3 C 15 diagnostic bed 1 (piece)

4 sc 1 f/sc3f x-ray tubes/125KV each1(only)

5 YS09D electric beam limiter 1 (piece)

6 YS 127B high-voltage cable 1 (paid)

7 YS 127C high-voltage cable 1 (paid)

Optional parts

8 LSJ BuckyWall Stand 1 (piece)