How to open the Audi driving recorder?

(1) Press and hold the power key to turn the power on or off.

(2) When the charger is connected, the DVR will automatically turn on, and when the charger is disconnected, it will automatically turn off after a delay of 5 seconds.

[2] Video mode: After the DVR is turned on, it automatically enters the video state, and the video indicator flashes. When recording, press OK to stop.

Note: Please insert the SD card before use.

[3] Photo mode: Press the mode key to select the photo mode after startup, and press the OK key to take photos.

[4] Preview mode: press the mode key to select the preview mode, press the up/down key to select the video file, press the OK key to play or pause, and press the mode key to exit.

[5] Avout function: Connect the DVR to an output terminal such as a HDTV with an AV cable, and you can record, browse and play video files on the TV.

[6] Screen display switching: After turning on the DVR, press the switch key to switch three display states: front lens display, rear lens display and dual-channel simultaneous display.

[7] Screen saver: When the DVR is in standby or recording state, press the power button to turn on or off the screen saver.

8. Motion detection function: Set the system menu: item, and start the motion detection function. When an object moves in front of the DVR, the DVR will automatically start recording, and when the object stops moving, it will automatically stop recording and enter the detection standby state.

When you quit motion detection, the motion detection function will be automatically turned off.

[9] Infrared night vision function: Right-click to turn on or off the infrared light of the rear lens when starting.

[10] Date and time setting: press the menu key to enter the setting options menu after startup, press the key to select the "date setting" option, press the OK key to enter the next menu, and use the mode key/toggle key/up key/down key to adjust the year, month, day and time. After all the settings are completed, press the OK key to confirm the exit from the submenu.

[1 1] charging

Connect DVRDC5V charger, USB5V charger or computer USB interface to charge. When charging, the red indicator lights up for a long time. When fully charged, the red indicator light will go out.

[12] Connect the computer: 1. U disk function: connect the DVR to the computer with a USB cable, select the U disk item in the DVR screen display interface, and press OK to enter the U disk mode.

2.PC camera function: connect DVR and computer with USB cable. In the DVR screen display interface, press the up key to select the PC-Camera project, and press the OK key to enter the PC camera mode. At this time, a standard video device will appear on the computer.

3. Computer USB video recording: Connect the DVR to the computer with a USB cable, select the REC-Mode item in the DVR screen display interface, and press the OK key to automatically enter the video recording state.

[13] System reset: If the equipment is abnormal during use, please press the reset button and the system will automatically reset.

Million car purchase subsidy