The number of major electrical fires in China is 202 1

On the fire day of 1 19, the fire rescue bureau of the emergency management department issued the national fire situation report of 202 1 to 10. According to the data, in terms of fire types, the number of electrical fires still ranks first, accounting for 50.4%!

There are many reasons for electrical fires, such as wiring without permission, aging of lines, short circuit, and fire of electrical equipment. Pay special attention to safety when using electricity at ordinary times.

202 1 electrical fire case

0 1

At about 2021August 27th 16, a fire broke out in Kaixuan International Building, Jinpu New District, Dalian: a fire broke out in the home of a household on the floor of Block B 19 of Kaixuan International Building. The fire affected 4 19 households and evacuated 1800 people. Through analysis, it was determined that the fire broke out in Room 65438 19 19 of Building B. The fire was caused by poor contact of the plug and socket of the power cord of the charger of the electric balance car, which ignited combustible materials such as the surrounding wooden wardrobe.

02

On August 6th, 20265438, at 04: 14, a fire broke out in a private house at No.25 Nisha Wharf, Qianying Village, Zhu Qiao Town, Pudong New Area. The on-site building is a rural self-built house with a single-story brick-wood structure. Old damaged wires caused a fire, which killed four people.

03

On July 28th, 2002 1 year, a fire broke out in a residential building in Xinghuicheng, Yuexiu, Hangzhou, Zhejiang Province. 1 person fell down while trying to avoid danger and died after being rescued.1person died after being sent to hospital. According to the surrounding people's speculation, it was because of the fire caused by charging the electric car at home.

04

At about 4: 30 pm on July 28th, a fire accident occurred in the factory building of Gan Mao Luggage Accessories Co., Ltd. in Xilu Village, Baigou Town, Baigou New Town. Through analysis, the fire accident occurred because the aging circuit ignited the combustible gas. Six people were killed in the accident.

05

On the afternoon of July 24th, 20021year, a three-story logistics warehouse suddenly caught fire in a park near Yinfeng Road and Jincheng Street in Changchun, Jilin. The accident caused 15 deaths and 25 injuries! After investigation, it was found that the fire was caused by the failure of the lighting circuit in the upper part of the studio of the wedding photography city, which ignited the surrounding combustible materials.

06

On April 65438, 20265438, a fire broke out in the north workshop of Henan Huang Heren Industrial Co., Ltd. located in huanghe road, a demonstration area of urban-rural integration in Jiaozuo City (the company stopped production on June +04, 2065438). The cause of the fire was the aging of the circuit, which ignited the foam board placed in the factory building and led to the spread of the fire.

07

On February 25th, 20021year, a fire broke out in a dyeing and finishing factory in Huayang Village, Jinfeng Town, Changle District, Fuzhou City, Fujian Province, causing 6 deaths and 7 injuries.

08

On February 5, 2002 1 year, a fire accident occurred in a self-built building in Shenzhen, killing1person and injuring three others. The fire was caused by the short circuit of the electric meter box, which ignited the surrounding combustible materials.

Safe looks at the management strategy from the accident data.

Electrical fire accidents are frequent, shocking and costly. However, most fire accidents can be avoided by prevention in advance.

Through the early warning of electrical fire, lines, electrical equipment and specific dangerous equipment can be monitored in real time. Classify the early warning information and give it to different roles for processing; And in the three-level load scenario, it realizes hidden danger confirmation, supports local or remote power outage operation, and avoids derivative disasters.

The governance strategy is people-oriented, system-based, science and technology support efficiency, monitoring parameters should be comprehensive, and the technical reference of equipment selection should have the function matching the governance purpose and specific system operation.