Instructions for use of dv camera

Generally, mainland licensed goods are accompanied by bilingual instructions. Your machine was probably bought abroad or in Hong Kong and Macao, right?

But no matter what language, the operation is the same, but it is more troublesome to understand. Now let me give you a brief introduction.

When a machine is in hand, we must first determine the power supply of the machine, including the power supply check before starting, the on/off/power switch (playback) of the machine. Before shooting, put the charged battery into the machine and turn on the switch. The indication on the switch means that when the switch is turned on, the off position is closed, A autofocus, M manual focus and autofocus. Press the Auto key to turn on Auto Aperture, Auto Gain and Auto White Balance Tracking. A 60-minute DV digital video tape in DV format can be used for 90 minutes in LP mode, and the recording quality of LP is the same as that of SP, but the tape recorded in LP mode cannot be dubbed and has poor compatibility, that is to say, the tape recorded in LP mode of this machine may not be played normally on another DV machine. Secondly, when the scene seen in the viewfinder is not clear, the eyepiece correction handle under the viewfinder should be adjusted to achieve clarity. The third thing to master is the start/stop button. This button is usually red or marked with a red dot. Click start photography, and then click stop photography. The fourth thing to master is the zoom handle. This handle is generally marked with the word W/T, which can produce special effects by shooting at close range or wide angle. When used for wide-angle shooting, that is, "zoom out", push the handle to the "W" position; When used for close-up shooting, that is, "zoom in", push the handle to the "T" position. The "zoom in" and "zoom in" here refer to the effect of "zoom in" and "zoom in" on the distance of the camera relative to the target when the target is not moving. The fifth thing to master is the view video search button, which usually has a curved arrow mark next to it. When the video recorder is turned on, you must press this button before starting a new shooting to see if the played back image is a post-shooting, so as to determine the recording position of the tape. The sixth thing to master is the photo button, which is usually marked with the word photo next to it. When the camera is on, every time you press the button, you will take a photo. The correct use of tape, do not reuse the same tape, and do not rewind the tape when cleaning, which is easy to wear the head. As for whitening, it is best to find a piece of white paper or face a white wall for a few minutes. The machine can recognize automatically, but the indoor and outdoor environments are different and need to be adjusted separately. Photography is not a simple operation, but also depends on creativity and inspiration. Only by slowly finding the rules in actual operation can we produce good works, and practice makes perfect. . . .