Design of flash circuit for DIY camera

Update 1: I knew there was nothing to change first.

You can't use the reverse baby phase to solve the same burial point.

Just because the flash

Design of flash circuit for DIY camera

Update 1: I knew there was nothing to change first.

You can't use the reverse baby phase to solve the same burial point.

Just because the flash mirror has no set output doesn't mean you can't marry me with an exposure meter, you can marry me with a shadow.

If I want a new D flash, I won't wash it. ......

The xenon lamp is not twisted. It is too complicated. Use high voltage 1200- 1500V circuit to light up, and then step down to 200 v to light up. It's so hot, expensive, difficult to stir and consumes a lot of electricity. Use LED. Simple, fast and affordable. In fact, the light emitting angle of LED itself is very thin. It needs ten and eight pieces of adjustment to enlarge the lighting angle. Your antique flash (fan) doesn't have much effect, it's really dispensable. However, it is too hidden to play the role of wilderness. Many video lights at home are made of left light-emitting diodes. You can take anything, and the photos must be ok. Super bright LED, it is not difficult to achieve 800 lumens in ten capsules.

Just buy a new flash, but don't sell it You don't need to repair it. If you just want to flash, don't use photos, just ask it to be equipped with ultra-light led, 3v is enough. Diy means that you create new varieties with the parts at hand. For example, if you have an old film camera that can no longer be used, you can remove some parts of the flash and install it. You can say that antique flashlights are made of magnesium, of course, there is no more.