What should I do if the camera of Apple's mobile phone fogs?

1. What should I do if the camera of Apple's mobile phone fogs?

1. When the weather is sunny and dry, choose windless or breezy weather to dry in the sun, and pay attention to dust prevention.

2. Prepare some desiccant, put the mobile phone and desiccant together in a plastic bag and seal it, and then put it in a place where the temperature is slightly higher than the ambient temperature, such as in the sun (don't expose to the sun) or under the yuba. Be sure to keep a proper distance and feel slightly hot. After a while, the water vapor can disappear.

3. If the water mist is serious, you need to turn on the iPhone for mirror cleaning, and other functions can be checked by the way.

Maintenance of Apple's mobile phone camera;

1, try to avoid pointing the camera directly at the sun to avoid damaging the image sensing device of the camera.

2. Avoid contact between the camera and oil, steam, water vapor, moisture and dust, and avoid direct contact with water.

3. Do not use * * * cleaner or organic solvent to wipe the camera.

4. Don't disassemble the camera at will, and don't try to touch its internal parts unless necessary, which will easily damage the camera.

2. How to defog the Apple 6plus camera?

Hot and cold alternate, and water vapor enters. I suggest you wrap your mobile phone with a layer of toilet paper and put it in a tea can for a few days.

After the mobile phone is flooded, the general treatment method is:

1. Note that the first thing to do at this time is not to turn on the power. If it has been opened before, please close it immediately.

2. Remove all iPhone cases.

3. Take out the SIM card and blow dry it immediately, and then wrap it in paper.

4. Use a cotton swab or paper towel to suck the earphone hole, tail plug interface and side key. Both places are equipped with water testing labels. The water inspection label will turn red after self-inspection into the water. Water can easily stay here. But don't be afraid, you can continue to use it after carefully asking for water.

5. Wrap the fuselage with a towel or paper towel with good water absorption to absorb water. Never use the method of throwing. The shaking will make the water that has entered the fuselage disperse and touch the parts that can't touch the water, which will lead to worse results.

6. Finally, observe the LCD screen and camera to see if there is fog. If there is, you can wrap the fuselage with paper towels and put it in a sealed bag. At the same time, you can put the desiccant commonly used in snacks, try to evacuate the air and seal it.

7. Then put the whole iPhone in a slightly hot place, such as AC power supply and computer heating. Be careful not to put it in a high heat environment, and you can't always blow it with a hot air cylinder, which will damage the internal components. When there is no fog, it is best to put it for half a day and take it out to naturally restore the room temperature; After taking these measures, if it can be started smoothly.

I have seen many such cases in the Apple Repair Center. If you really can't boot or the screen is black, you can only learn. I need to find mainboard chip maintenance personnel to check the battery, mainboard power chip, display chip and other components first, then troubleshoot them one by one, and then replace the related faulty components. Normal startup can be restored.

3. How to deal with the fog on Apple's mobile phone camera?

Don't use unnatural means such as hair dryer.

I suggest you put it under the covers at night, or put it on the windowsill or balcony to dry naturally in sunny days.

Method 1: When the weather is sunny and dry, choose windless or breezy weather to dry in the sun, and pay attention to dust prevention. The SLR lens can be shot for a long time, and the mobile phone camera is relatively small, which can be done in a short time.

Method 2: Prepare some desiccant, put the mobile phone and desiccant together in a plastic bag and seal it, and then put it in a place with a slightly higher temperature than the ambient temperature, such as in the sun (don't be exposed to the sun) or under the yuba. Be sure to keep a proper distance and feel the slight heat. After a while, the water vapor can disappear.

4. What if there is water mist on the 4.iPhone 6 camera?

Suggestion: put it on the windowsill or balcony to dry naturally on sunny days.

The first step after the iphone6 enters the water: turn it off. If the phone is still on, the first step after getting it is to turn off the power and press the lock button. Because the motherboard will burn out due to eddy current short circuit when it is flooded, the second step: the mobile phone case is easy to understand. The mobile phone case is a container with five sides closed, so it is easy to store water. If someone doesn't clean it, the water in the phone case may enter the power button, volume button or earphone charging hole, causing damage to the motherboard.

Step 3: Dry the phone. After removing the shell, dry the phone with a towel or cloth with good water absorption, first wipe the body, then wipe the earphone hole, then unplug the SIM card and put it elsewhere, not in Cattori. Step 4: The water in these places can be dried with toilet paper or hair dryer. Because if there is a test paper in the repair shop, it will turn red when it meets water. You can use a toilet paper roll into a small round stick to absorb water, such as earphone holes.

Step 5: Camera Because the camera is protruding, it is easy for water to enter the gap. The best way is to turn the hair dryer to a low wind speed and then blow dry it. Step 6: Don't turn it on after finishing the above steps last night. Put the mobile phone in the box and add food or other desiccants (iron powder and lime, etc.). ) throw yourself into it. If there is no need to put a bowl of rice, then cover the box and wait for the test to start one day and one night. If there is no problem, congratulations, the mobile phone can be used normally.