Traditional Culture Encyclopedia - Photography major - How to copy the film from the photosensitive belt to the computer?

How to copy the film from the photosensitive belt to the computer?

Your love machine must be equipped with IEEE 1394 card, if not, it can be done for tens of dollars. Remember, there is still a line between DV and computer, the desktop is 4 to 6, and the notebook is 4 to 4.

Check it first: control panel = & gtSystem = & gtHardware => If the device manager sees the main controller of IEEE 1394 bus, the hardware is successfully installed, otherwise (the installation is very simple, just open the main chassis, find a free slot to plug in and tighten the screws). After the 1394 card is successfully installed, connect the DV transmission line (4-to-4 or 4-to-6) to the computer (this line is not configured by DV itself, but is used to connect the IEEE 1394 card. It's sold in the computer shop, a few dollars each. Open the video editing software, and then turn on the DV power supply, you will find a prompt, and press the prompt to confirm.

The collection format (large capacity or small capacity) can be customized, and the recording format can be customized.

If you don't have video editing software, you can use audio and video 8 or 9, all in Chinese, which is easy to use and fully functional. There are downloads online, including serial numbers, which can be found in Baidu search. Files are large and small, ranging from 100 m to 400 m, but there are still some differences with your own material library, depending on your own needs.

Auditorium 8 Simplified Chinese version (with registration code):

/pcedu/SJ/media/video/05 12/733836 . html