How to put down the back seat of Buick Regal?

An example of the process of putting down the back seat of Buick Regal. When large items must be placed, just pull the back seat door handle above the storage box and push the back seat forward, so that the back seat can be leveled, which is very simple in actual operation.

However, different cars may have different leveling steps, or the following steps:

1. Pull the door handle located on the backrest side of the passenger seat (as shown in the figure below) to expose the tongue;

2. Retract the seat back downwards. If necessary, repeat the above steps to extend and retract the other seat back.

Dismantling the back seat of Regal is not a simple technical task. If it is too hard, it is likely to damage the button below, so you need to buy a new buckle for installation.

First, immediately stretch the front side of the back seat (it must take effort);

Secondly, move the seat back and forth, left and right. There are four buckles at the bottom of the seat, and the first two buckles can be unfolded immediately. The rear two buttons must be moved up and down, left and right to separate the seats.

Finally, take the seat away.

When you put it back, point to the button below, and just put it back hard.