Xiaobai must avoid this pit when using the camera for the first time! !

When using the camera for the first time, Xiaobai must avoid this pit.

Use directly without inspection

First, never use the camera directly without checking the machine. Check whether there are traces of secondary seal on the camera package, and whether the seal and anti-counterfeiting mark are damaged. There is something wrong with the seal, so you must refuse to sign it! The anti-counterfeiting mark is located in the upper right corner of the package. You can see the digital security code of 16 digits when you tear it open. You can go to Canon's pipe network to inquire.

Second, check whether the camera accessories are complete, including the body, lens, battery, adapter and shoulder strap.

Third, check the model and check the integration of the four ma. When you get a camera, you must first check whether the camera model is the same as when you bought it. The four ma's include: the serial number below the barcode on the box of camera A, the serial number at the bottom of camera B, the serial number on the warranty card of camera C and the serial number of camera D.

Do not set the storage format.

Many friends always feel that the photos taken by the camera lack a little feeling and want to color them later. At this time, we need to set the camera's photo format-RAW format. IPG format is a compressed format, and the file size is small, occupying less space: it is more convenient to transmit and look at pictures directly, but the general RAW format can retain more colors and details of photos, and there will be more adjustment space for later retouching.

1. Shoot the sun directly.

You can't shoot the sun directly with your camera, especially at noon. When the sun is close to the composition range, the focus of the sun through the lens will cause a fire; And watching strong light or the sun with a viewfinder may cause permanent vision damage. If you have to shoot, remember to go to Budd film or high-power ND mirror to dim the light.

2. Take a pure black or pure white background.

Shoot a white wall or a pure black background at the camera, because there is no subject, the camera is likely to lose focus. If shooting is necessary, set the focus mode to manual mode for shooting focus.

Battery and memory card: Many friends can't wait to put the battery on when they get the camera, but after taking it out, they find that the camera is dead soon. Therefore, it is the first time that the camera is unpacked to charge the battery.

charge a battery

① Remove the battery protection box ② Put the battery into the battery box ③ Power cord continuous charger. When the plug is plugged into the socket for charging, the orange light flashes, and the green light is always on when it is full. The new machine usually needs to be fully charged for 4 hours, and then it can be charged for 2-3 hours.

4. You can take photos without installing a memory card.

The camera can only take pictures if it is equipped with a memory card, otherwise it can't store the influence. 64G/ 128G is enough for daily shooting. 95MB/S marked on the card surface refers to the storage speed. If the camera shows "BUZY" when shooting, the card speed is too slow.

Use an ultraviolet mirror

Many friends who start with cameras don't care about this problem, or in order to save a little budget, they don't install UV mirrors and hoods. This is a very wrong practice ~UV mirror and hood can protect the lens from the sun. If you accidentally hit the camera during daily shooting. People who use UV mirrors and shading devices will only damage the filter. Without these, it is likely that your lens will be broken. Be sure to set autofocus.

The camera has auto focus/manual focus mode. If you don't choose the right focus mode, you will find that the photos you take are always blurred. Here are some reasons. First, if the lens is too close, the focal length of the camera lens is the closest. If the subject in the lens is too close, it is impossible to focus. Second, the focusing method is wrong. There are two camera focusing modes: manual/autofocus mode. Manual focusing requires rotating the focusing ring.

6. Don't let the lens lock be unlocked.

Some zoom lenses are locked when they are put away. You need to hold down the locked slider to rotate the lens to use it normally, otherwise the lens will always be locked and you can't take pictures.

7. Change the lens at will

In daily shooting, we often encounter scenes that need to be shot with different lenses, so many people will ignore this detail. When changing lenses, try to choose indoor or clean environment. Changing lenses in magnetic field, static electricity, dusty, humid or high and low temperature environment will accelerate the aging of equipment.

8. Wipe the lens at will

Don't wipe the lens with corner paper towels, which can easily scratch the lens coating. Affect imaging, lens cleaning: the floating dust and hard particles on the lens can be blown off by a blower, and the body cleaning: blow off the surface dust with a blower, and then wipe the lens body and the body with a clean wet towel.

9. Unable to select lens

When shooting, the picture taken with different focal lengths has different effects. Friends can choose according to their own needs, taking portraits: choosing a large aperture fixed-focus lens, taking scenery/architecture: choosing a wide-angle lens, concert/lotus: choosing a telephoto lens, sweeping the street/traveling: choosing a zoom lens.

10. Do not apply shooting parameters.

Camera parameter is not a fixed value, it is influenced by many factors, such as shooting environment, time, light and so on. It is impossible to take the same photos with the same parameters in different environments.