What are the installation steps of Buick Lang Wei reversing image?

Buick Lang Wei reversing image has two installation steps: 1. Installed on the license plate light. This installation is relatively easy. Just use the small screws provided in the camera accessories to fix the camera on the license plate light. By adjusting the iron sheet or gasket in the accessories, the camera can reach the best reversing angle. The wiring of the camera penetrates into the car through the gap of the license plate lamp, and is connected with the backup lamp power supply and the video extension cable. This kind of mounted reversing camera is a popular one at present, which is more concealed in appearance and easier to install. 2. The advantage of drilling and installing the embedded bumper is that there is no need to drill holes in the metal parts behind the car, because the bumper is a plastic part, and it is relatively easy to wire the camera. Finally, connect the power cord of the camera with the power cord of the rear reversing lamp, and then connect the video cord of the camera with the video extension cord. The other end of the video extension cable is connected to the AV input of the vehicle-mounted display, so as to restore the battery power supply, start the vehicle to put on the reverse gear, and then you can see the reverse image on the vehicle-mounted display.