How to remove the 360 ??driving recorder bracket

1. Disassembly steps of 360 driving recorder

(1) Disconnect the power supply first;

(2) Prepare disassembly tools: knife, flat knife a flat-blade screwdriver;

(3) Use a knife and a flat-blade screw to slowly pry open the seam on the camera side;

(4) After prying it open, remove the The battery will be visible through the cover;

(5) In order to facilitate installation, do not damage the original solder joints, just cut the wires connected to the battery. Also note that in order to prevent short circuit, do not cut short at the same time. , cut them off one by one.