Is there any skill in taking photos and dimming?

Night shooting generally requires a large aperture and a small speed. But it's ok to shoot still life like this, but the performance on the stage is like a rabbit. With ordinary optical cameras, 400-degree film can solve this problem. However, there is no way for digital cameras, and the speed is slow and the virtual shadow is serious; Fast, insufficient brightness; If the ISO value increases, the noise is serious, the picture is seriously damaged, and the shutter speed of digital camera is slow, it is really a headache to take stage photos. Sometimes when you see an actor appear, you press the shutter immediately. When the lens reflects, it either captures the back after turning around or captures the empty stage where the actor has finished his curtain call. It seems that manufacturers of digital cameras should not only work hard on high pixels, but also greatly strengthen other aspects.

Before the technical breakthrough, the solution is as follows:

1 First, shoot the stage in a lighting environment, as close as possible to the stage. Otherwise, the greater the optical zoom factor, the greater the influence of camera shake, even with a tripod.

You must use a tripod. The shooting stage in lighting environment is equivalent to night scene mode. That is, large aperture and small speed. An effective way to prevent jitter from affecting image quality is to use a tripod. Or support the front seat with your elbow, which also has certain effect.

3, don't take a panoramic view, the contrast between light and dark in the panoramic environment is too big, and the phenomenon of virtual shadow is serious. The lens mainly captures individuals or parts.

4. The most effective solution is to increase the ISO value of the camera in the settings. In an environment with insufficient illumination, the higher the ISO value, the more effective it can be to compensate illumination, but the result is a decline in image quality. But this is directly related to the quality and grade of the camera. The ISO value of some cameras can be increased to 800, and the image quality will not be significantly reduced. So you have to try more, from ISO200 to ISO400, slowly increase and compare the photo output.

5, there is to shoot more, don't let the camera idle. Because of the moving scene, you can't decide what to shoot at all, so shoot more and make a choice.