How to connect the camera, hard disk video recorder and monitor?

Installation and connection steps of video camera, hard disk video recorder and monitor:?

1. First, install a webcam and connect it to the switch through a network cable. The advantage of network camera connection is that each network cable does not need to be unified on a switch (for example, a camera needs to be installed in the distance. If ten cameras need to be installed, the traditional cameras must be plugged in with a video recorder at the same time to be used normally. However, an extra switch can be added to the network camera, which can turn the switch of ten network cables into a switch that only needs to be pulled by one network cable.

2. If you connect to the switch through a computer with a network cable, you can see the online camera. You can also connect IPAD and notebook through Wifi wireless network. First, let's see if your camera supports mobile phone viewing. If so, what about this IP?

CAM has been connected to the public network, and the mobile phone is a smart phone, which can be remotely monitored online. You can also connect to the switch through NVR video recorder, and the screen can be connected to the video recorder at any time. Remote users can watch, control, manage and record IPC by logging in the domain name of IPC. Remote users can log in to IPC through Web browser (IE) and corresponding video centralized management software, which is very convenient to operate, so they can use network cameras normally.