How to replace the flash tube

When it is clear that the components of the camera flash tube are broken, you can buy your own flash tube besides going to the maintenance point for maintenance. The price of flash tube is in the price range of 200-800 yuan, which varies according to different brands and specifications. When replacing the camera tube, pay attention to check the model and whether it is universal. We should make a good record when disassembling the lamp. The method is to uncover the two sides of the shaft with tools and replace the good lamp tube. Please follow me to the article for specific methods and steps. 1. How much is the flash tube?

If the flash tube in the camera is broken and you can repair it yourself, how much will it cost to buy it yourself?

Generally speaking, the price of a camera flash tube is around 200-800 yuan. An obvious purpose of the flash is to supplement the light when shooting, that is, to artificially increase the light for the subject under the condition of insufficient natural light. Another function of the flash is to disperse light during photography. By arranging the position of light and the way of projection (direct light or flash, soft light or strong light, beam or not), the interest of photographic works can be increased or the quality of photos can be improved. Multi-lamp cooperation and the use of off-camera flash greatly improve the photographic effect.

Second, how to replace the flash tube

If you want to save money and have strong hands-on ability, you can buy your own lamps and accessories, and the cost is much lower, which is about 1/5 of the maintenance cost. So how do you replace the flash tube yourself?

First of all, check the model and whether it is universal in advance, and record the steps when disassembling the lamp.

Replacement method: there are two fixing screws at the bottom of the lamp holder, and eight screws are hidden at the movable joint of the lamp holder steering shaft and the lamp body. You can see them by uncovering the rubber parts on both sides of the shaft with a small tool (fixed with double-sided tape). When you disassemble the lamp holder, you will find that the structure is much simpler than you think, and then you can disassemble it, replace the lamp tube, and go up the same way.