What should I do if the gas stove bracket rusts? How to remove the rusty burner?

What should I do if the gas stove bracket rusts?

After the bracket of the gas stove rusts, people can scrub the rusted place with steel balls with detergent. Generally speaking, the rust of the bracket is caused by oil stains, and it should be easy to clean with detergent.

If people think that the steel ball will scratch the bracket, or in order to better remove the rust of the bracket, people can go to the supermarket to buy a special rust remover. After that, people spray rust remover on rusty places and wait for a certain period of time before cleaning. Or take off the bracket, soak it in rust remover, and then rinse off the rust with clean water. When using this method, it should be noted that the gas stove belongs to mechanical appliances, and the rust remover contains chemicals, which will damage the bracket if used too much.

People can also scrape off the rust on the bracket with sharp tools such as blades and shovels, then clean the rust with steel balls and detergent, and finally it will be clean.

After the gas stove bracket is rusted, in order to avoid rusting again, it is best to apply some anti-rust paint and other products, or wipe it in time after use, which can effectively avoid the gas stove rusting.

How to remove the rusty end of the gas stove?

People need to prepare a cross screwdriver, a straight screwdriver and artistic modeling tools before the gas stove is rusted and disassembled. Then turn off the gas source to avoid gas poisoning.

Then, people use a cross screwdriver to remove the screws of the gas stove plate, and remove the baffle, stove rack and gas ring that have been separated from the gas stove plate at this time.

After that, people need to take a utility knife to scrape off the oil pollution along its interface, and then pry the dial of the gas stove off the tempered glass with a screwdriver.

At this point, the disassembly of the gas burner is completed.

Non-professionals are not advised to disassemble the burner of gas stove by themselves, because people may damage some parts during disassembly. To be on the safe side, it's best to invite a maintenance master to check and repair at home.