Traditional Culture Encyclopedia - Photography major - Installation method of led flat lamp
Installation method of led flat lamp
Prepare tools
Prepare needle-nose pliers, solder, AB glue, multimeter, etc.
Specification determination
It is also necessary to determine the specifications of led flat lights to see if they meet the requirements of brightness and quality, whether they are damaged or not, and whether everything is installed without problems.
Burn the board
Fix the lamp board according to the selected installation method, and then weld it with an electric soldering iron. The temperature of the soldering iron is controlled above 200 degrees. Welding can be completed in about one second, and the circuit board will not be damaged because of too long time.
Lamp connection
The wiring on the lamp can pass through the drilling hole, and the wiring behind the lamp can be fixed with a clamp to ensure firm fixation. Ensure that the power cord of the lamp has sufficient length, and avoid tension and knotting during installation. Pay attention to distinguish the output connections and don't confuse them with others.
installation instructions
The rest can be installed a little bit according to the installation instructions. Read the installation instructions carefully first, and then do the actual installation after you are familiar with them.
- Previous article:What is the use of barium ore?
- Next article:What happened to the middle and lower reaches of salted fish
- Related articles
- How cold are those rational people?
- How to make a picture with a jigsaw puzzle?
- Is Tang Hengyuan's painting valuable?
- The best time and place to see red leaves in Kansai is 20 18
- Photographers are not wet.
- Which is better, Shiyan or Mrs. Jin?
- Xu Zhen directed and filmed.
- Four main typesetting and typesetting methods
- Poster flyer background-how to use word to make flyers with background
- Shanxi design products photography training