Camera channel

The audio output of HVR- 1000E is a pair of RCA (Lotus Port), which are respectively connected to the mono channel of the mixer with a set of RCA-to-TS(6.5 cores) (the stereo effect can be adjusted by the audio-visual PAN knob) or directly connected to the stereo input of the mixer.

If you need to send the sound of the mixer to the camera, you can use a pair of unbalanced outputs of the mixer to convert it into a 3.5 three-core camera.

Ask again: It is estimated that the main output of the mixer has been used for on-site sound reinforcement. Usually, on-site sound reinforcement will occupy the XLR cannon output of the mixer. If the mixer has stereo packet output (SUB 1-2, etc. ) is available, or there is CTRL,

room

/

Monitor output is available, or REC recording output is available, which can be converted to 3.5.

The camera adopts TRS (Stereo Tri-Core) to realize dual-channel acquisition. Note: The bus paths of various outputs of different mixers are different, such as some mixers CTRL.

Room volume may be different from HP (head)

Telephone, earphone), controlled by the main fader+earphone volume knob. . Choose which output is best to try several times, depending on the specific situation.

Noise may be a connection problem. Correct connection: left channel output+3.5 small core tip, right channel output+small core ring, and left and right channels are grounded to small core (sleeve) ground.