How about Nikon d6 10 now? Please comment, thank you.

If there is enough money, it is suggested to start with the high-end models in Quan Huafu. D6 10 was launched on 20 13 and 10. In fact, it's not an upgraded version of d600, rather, it's a revision, and it's basically stopped production. It is suggested to start with high quality products such as d750, d8 10.

The Japanese DC Watch website has brought us a trial experience of Nikon D6 10. In order to make it easier for everyone to understand this product, we have compiled relevant contents for reference.

[Specification]

The appearance of D6 10 is very similar to that of the previous generation D600. Its top shell and back shell are made of magnesium alloy, and the joint of the fuselage is effectively sealed, with excellent dustproof and waterproof performance. In addition, the product size and weight are exactly the same as D600.

D6 10 still uses FX CMOS image sensor with 24.26 million effective pixels and built-in olpf. Following the image processing engine of EXPEED 3, the sensitivity range is ISO 100-6400, which can be extended to LO1.0 (ISO 50) ~ HI 2.0 (ISO 25600). Fine adjustment can be made in steps of 1/3 or 1/2EV between ISO 100 and 6400.

D6 10 is equipped with a glass pentaprism optical viewfinder, with a view ratio of 100% and a magnification of 0.7 times. A 39-point autofocus system with a 9-cross sensor, and the central 7 focus points support F8 aperture.

D6 10 uses SD memory cards and UHS-I compatible SDHC and SDXC memory cards. Dual card slots can be used to store images created by NEF+JPEG respectively; Images between two memory cards can be copied from each other. The maximum image size of JPEG format is 10.8MB, and RAW is 29.2MB. If a 64GB memory card is used, RAW+JPEG format can take about 1600 pictures.

Compared with the previous generation D600, the biggest upgrade of D6 10 is that the continuous shooting speed is increased from 5.5 frames/sec to 6 frames/sec, although the speed perception has not changed much. But it has reached the same continuous shooting speed as flagship machine Canon EOS 5D Mark III and Sony α99. In addition, a mute continuous shooting release mode (Qc) is provided to mute the continuous shooting at a frame rate of about 3 frames per second.

Key layout of D6 10:

Test sample (click on the small image to view the larger image)

Comparison of balance accuracy between D6 10 and D600 automatic racket.

D6 10 D600

In "AUTO 1" mode, D600 feels a little brown.

D6 10 D600

It is also "AUTO 1" mode, but there is no color cast here, which is really confusing.

D6 10 D600

The color reproduction of D6 10 is very natural and accurate. But the picture was taken at three o'clock in the afternoon. I prefer the soft performance of D600.

D6 10 D600

Both cameras perform well in shooting brick buildings. But the pictures taken by D600 are closer to the real color.

D6 10 D600

Turn on the incandescent lamp when shooting indoors in "AUTO2" mode. From the picture, the picture taken by D600 seems a little red.

Sensitivity test

The normal use range is ISO 100-6400, which can be extended to LO1.0 (ISO 50) ~ HI 2.0 (ISO 25600). Provide "high sensitivity noise reduction" function.

Six types of optimal calibration

Standard natural and realistic monochrome portrait landscape

Nikon D6 10 is an entry-level Quan Huafu SLR camera. It has a high pixel quality of 24 million and a compact body design. It is a cost-effective camera for ordinary users and families. After listing, it caused widespread concern. After all, a fully equipped machine with less than 10 thousand yuan is still very attractive. In particular, many Nikon users have found the best choice to upgrade their equipment.

How about Nikon d6 10 now? Nikon D6 10 is the cheapest digital SLR camera produced by Nikon in Quan Huafu. At present, the price of a single machine is around 4,000, which is considered as "good quality and low price". As for buying Nikon D6 10, is it suitable for the subject? I think it is important to consider three issues:

1. What do you think of Nikon's SLR system? As we all know, Nikon's SLR system has used the F bayonet for 60 years, from mechanical bayonet to full electronic automatic bayonet step by step. During the period, many problems such as compatibility and too small bayonet size were also exposed. Therefore, Nikon SLR cameras have been pressed by Canon in products such as ultra-wide-angle lenses, ultra-large aperture lenses and shift-axis lenses. After Nikon introduced Z-bayonet, this F-bayonet of SLR system has obviously been "dead end".

If you can accept Nikon's patched SLR system and are satisfied with Nikon's existing lens system, you can buy it at buy buy. On the other hand, if you like the new and hate the old digital products, it is obviously unwise to spend money on a system with no future.

In a word, the cost performance of D6 10 is quite high, but it is because Nikon SLR system is "almost hopeless" that it has such a low price. Buyers in the market are not fools.

2. Do you need a video? All Nikon SLR cameras do not support CMOS on-chip phase focusing technology, and all video recording needs manual focusing. Nikon's SLR is obviously not suitable for stand-alone use, recording interviews or vlog tasks. Consider Sony or Canon products.

3. Have a reasonable understanding of the entry-level full-frame camera. Entry-level full-frame digital SLR cameras such as D6 10 and Canon 6D are not much worse than flagship products. There are high and low pixels, but low pixel models also have the advantages of color and high sensitivity. However, the biggest weakness of entry-level products is focusing performance, which is also an important reason why a large number of Nikon and Canon users fled to Sony micro-cameras.

I have met many photographers who are too idealistic when choosing machines. They always think that they can easily have the first-class image quality of 135 system by buying a 6D, D6 10 with a 50mm f/ 1.8 lens. As a result, you took it out in actual combat, and all kinds of virtual focus images immediately made you understand that the reality is not that simple. ...

So, is Nikon D6 10 worth buying? It depends on how you understand and treat the above three problems. D6 10 is a good choice for friends who don't blindly chase new products and play videos.

Nikon D6 10 is an entry-level machine in Nikon Quan Huafu system. Although it is an upgrade of D600, it is only a minor upgrade of continuous shooting and White Balance. The biggest upgrade significance of this machine is the slag door repair of D600 machine. Nikon's slag gate incident was accompanied by the D600 machine. Later, after 3 15 was exposed, Nikon paid attention to it and launched an upgraded model to change the machine for users free of charge. So D6 10 is a recycled product of D600, and there is basically no difference.

Then I can say responsibly that D6 10 didn't cure the slag drop at all, but it did drop a little … just not as serious as D600. This has something to do with the design of the whole fuselage. The fuselage in APSC format is forced into the Quan Huafu sensor and then into the corresponding shutter assembly. Unless there is a brand-new fuselage structure design, such a small change is difficult to cure.

As for the performance of D6 10, it can be said that it is good in the paper parameters of entry-level Quan Huafu, and the key is the price. Nowadays, there are many second-hand machines on the Internet. You can find machines with newer colors for 3-4 thousand yuan. The biggest disadvantage in performance is the focusing system. Except the center point is more reliable, other focusing accuracy is similar. After all, it's entry-level There is also a high-quality image. Although the pixels are not high, there is still a gap between the overall high-quality image quality and the high-end machine. Finally, Nikon's current product strategy has all focused on the Z bayonet system. Except for the release of some top telephoto lenses and news machines, the F bayonet is basically not updated. However, at present, with the accumulation of F-mount for 60 years, the lens group is quite rich.

I started to use Nikon D6 10 from April 20 14, mainly to take pictures and talk about my personal feelings.

6 10 is Nikon's entry-level Quan Huafu SLR, which is actually a slightly modified model for fire fighting. Compared with Nikon D600, it only upgraded the shutter assembly, increased the continuous shooting speed of 0.5 frames per second, and improved the accuracy of white balance, and nothing else changed.

It has been used for nearly four years, so far the machine has been used well, and the overall situation is good. First of all, the continuous shooting of the machine can reach 6 frames per second, which is enough to cope with most moving scenes; Secondly, the 39-point focusing system focuses accurately; Thirdly, this machine is tolerant enough for landscape photography. It is very important for landscape photography to use M-file shooting in the high light ratio environment in the morning and evening, which can basically keep the details of dark and bright parts. This machine is also very durable. I fell several times, especially 15 went to Xijiang Qianhu Miao Village to shoot and fell to the ground directly with a tripod. The UV mirror is scrapped, but the lens body is fine and there is no problem. It can be seen that the magnesium-aluminum alloy fuselage is still relatively strong. I also took photos at the Silver Beach in Beihai, Sanya, and stood the test of seawater. However, the high sensitivity of this machine is not so good, especially when it is high sensitivity, there is more noise in the dark part, which is more obvious when it is enlarged above ISO800, but it can still be used after processing.

Generally speaking, for an entry-level Quan Huafu SLR, it is powerful enough and worthy of its own price. Now the fuselage has dropped to about 7000 yuan, which is worth having for friends who want to experience Quan Huafu.

Thank you Wukong for inviting me to answer.

Please give me some advice. Is Nikon D6 10 worth starting now? Psychologically, I don't recommend Nikon D6 10.

Maybe a friend exposed some Nikon machines at the 3 15 party that year. Nikon D600 was exposed that time, mainly due to slag dropping and shutter problems. Nikon recalled this batch of products, and then released D6 10, saying that it was an upgrade of D600. In fact, it only changed continuous shooting, and everything else was similar. D6 10 should be called a revised version, not an upgraded version of D600.

Of course, we can't say that this model is a complete failure. It should be said that it is a good choice as an entry machine, and it can also meet the shooting needs of most friends. Of course, although it is an improved version of 600, you can rest assured that there will be no more slag falling.

This machine has more than 20 million pixels, which is enough for us.

Pacific company gives the advantages of this machine as follows:

1, with good image quality and high noise performance.

2. The fuselage is light and the volume control is in place.

3. Various filter modes and good video shooting performance.

4. Dual SD card slots

Of course, it also points out its existing problems:

1, focusing speed, real-life focusing speed is average.

2. The current price is not as attractive as that of competitors.

My suggestion: If you don't have enough money on hand, but want to own a Quan Huafu, you should choose this one. If you can add more, you can start with D750 and other models, which is really better. D6 10 is a little old.

It will be 2020 soon. If you want to buy a digital camera, you must be very clear about your needs. Don't buy a SLR just to pay the bill, it's unnecessary.

Do you really need a digital SLR? Maybe you should consider a camera phone.

Your specific question is, how about starting with Nikon d6 10 now? Please comment, thank you.