Fast focusing skills of sports photography

In sports photography, focusing is difficult to master. The following are the quick focusing skills of sports photography I shared. Let's have a look.

Professional sports photographers always focus on tracking: constantly changing the focal length, so that competitors can keep clear images in the picture at any time. However, it is difficult for a beginner to practice this technique perfectly.

An easier way is to use the autofocus system on the camera. Although the autofocus system can focus quickly, it can't play its due role if it is used improperly. That is to say, only when the subject is properly left in the ranging frame in the center of the viewfinder can the purpose of accurate focusing be achieved. If the camera is equipped with a lens with a short focal length and a large viewing angle, it is easy to arrange the moving subject in the ranging frame in the center of the viewing frame; If the camera is equipped with a long focal length lens of more than 200 mm, it may be difficult to track the subject and aim at the ranging frame because of the small viewing angle.

In order to adapt to this situation, we might as well change the above habits, and we can temporarily track the subject with the ranging frame, regardless of the scope of the viewing frame, which may feel easier. If you want to shoot the athletes outside the center of the picture, and you also use the automatic ranging system, you must use the focus automatic locking device to fix the focus. If the subject moves violently, it is not allowed to use the locking device in time, and the composition requires the subject to be outside the center of the picture, then the automatic focus must be cancelled and replaced by manual focus.

There is also a commonly used focusing method when shooting moving photos, which is trap focusing, that is, when the subject enters the predetermined focus, the shutter of the camera is pressed immediately. Some advanced cameras have this performance. Trap focusing is very suitable for sports photography, and it is the most ideal way to shoot the action of high jumpers flying over the beam. When shooting, you can first focus on a point where the athlete may cross the crossbar, then lock the focus so that it does not move back and forth, and finally press the shutter according to the situation when the athlete flies over the crossbar, so that you can take high-definition photos.

It is worth mentioning that if the subject is moving at an extremely fast speed, such as a racing car, the shutter must be pressed in advance when using trap focusing technology. In other words, the shutter should be pressed just before the subject reaches this position. Pressing the shutter in advance can make up for the time difference between pressing the shutter and actually opening the shutter. Of course, at present, the focusing ability of some advanced autofocus cameras has caught up with the speed of racing cars, and even if the racing cars gallop across the screen at the highest speed, they can be photographed. If you don't know which point the moving object will pass before shooting, but only know that it will pass through a certain area, then you can use the area focusing method, use high-sensitivity film as much as possible when shooting, and try to use a small aperture according to the light conditions and film sensitivity. When focusing, make this area within the depth of field according to the Jing Shenbiao on the lens, and set the accurate focus at 1/3 near this area of the camera, because the depth of the foreground is less than that of the backcourt.

By doing so, we can get better results. If athletes appear in the distance, they can be filmed in the way of hyperfocal distance. You can find the range of depth of field corresponding to the aperture used in shooting from the Jing Shenbiao on the lens, and then rotate the focus ring to align the depth of field mark behind it with the infinity mark of the focus ring, so as to get the maximum depth of field under the aperture used. If the athletes who want to take photos will appear in several different areas regularly, you can make a circle with paper tape and put it on the distance ring, preferably white paper, and set several special area signs on it. Just focus on the mark before taking a picture, and you can determine the focus position very quickly without focusing through the viewfinder at all.

The purpose of focusing is naturally to obtain high-quality images, and clear focusing is the requirement of the tomb. It is difficult to ask every photo to have a clear focus, because there are many factors that affect the focus. If you don't grasp it well, it is difficult to get a clear image. Here are some good ways to keep the focus clear:

1. Prevent vibration

Vibration will make the image in the photo shake and blur, even if the original image is in focus accurately, it will also affect the clarity of the image. Vibration usually has two reasons:

First, the camera shakes, that is, when the shutter is pressed, the camera shakes due to unstable grip.

The second is the motion of the subject, that is, at the moment when the lens shutter is opened, the subject is in motion, and the shutter speed is not high enough to freeze the motion, so the image is blurred.

To avoid camera vibration, measures can be taken from three aspects:

(1) Mount the camera on a tripod and stabilize the camera. If the tripod cannot be supported due to shooting conditions, a monopod can also be used.

(2) Increasing the shutter speed (usually 1/250 seconds shutter speed) can reduce the image jitter caused by camera vibration.

(3) adopt the correct method of holding the machine. Without a tripod, the correct posture of the camera will directly affect the stability of the camera. There is only one way to overcome the dynamic blur of the subject, and that is to increase the shutter speed. As long as conditions permit, the faster the shutter speed, the better the effect.

2. Don't pursue small aperture unilaterally.

Many people think that a small aperture will increase the depth of field and will definitely make the image clear. Therefore, no matter what occasion, the aperture is often very small, especially in the case of uncertain focus, I believe that a small aperture can also help. However, the final result is often not ideal, because using a small aperture will lead to a decrease in shutter speed, which will cause camera vibration. Therefore, it is not the best policy to pursue a small aperture unilaterally. The correct approach should be to actively use high-speed shutters and tripods.