The newly bought photographic lighting is broken, but it can flash. It only works when the styling light is turned on. What's the problem?

Maybe the position of the light pair is too bright. Try another posture.

Photographic lights are all lit when taking pictures by connecting flash devices. Generally, photographic lamp is a flash lamp that flashes by instantaneous burst energy, and modeling lamp is to model and simulate the light level in the direction of flash lamp.

Photography skills: 1. Sunny 16 Rule "Sunny 16 Rule" is a method to correctly estimate the exposure value in the sun without an exposure meter, so this rule is only suitable for use in sunny conditions. Set the aperture to F/ 16, and the shutter is synchronized with ISO, or slightly faster. For example, if ISO is set to 100, the shutter will be set to1100 seconds (1125 seconds). Therefore, according to this rule, F/22 aperture should be used for shooting on the beach and F/ 1 1 aperture should be used on cloudy days. 2. moonlight 1 1, 8,5.6 rule (Moony 1 1, 8,5.6 rule). When the shutter is synchronized with ISO, F 1 1 aperture is used for shooting the full moon, F8 aperture is used for crescent moon, and F5.6 aperture is used for crescent moon. 3. The Law of Camera Jitter When you shoot with the camera in your hand, the shutter speed should not be less than the reciprocal of the focal length of the lens. If the shutter speed is slow, the sharpness is more likely to decrease when shooting jitter. If a focal length of 50mm is used, the shutter should be above 1/60 seconds. Only when the environment is really dark, use a flash, tripod or put the camera on a hard object to prevent jitter. 4. Grey card of anatomy.

18% medium gray version

Carry 18% medium gray board with you, which is a sharp weapon for shooting. But what if I don't have a gray board on me? You can open your palm to face the sun, measure the light on your palm, and then increase the exposure.

5. After the depth of field is regular, the depth of field is twice that of the foreground. When the subject is deep, focus should be at the first depth of field of 1/3, because at this time, the depth of field after focusing is twice that before. This rule can be used in various combinations of aperture and focal length. Remember, the smaller the aperture, the shorter the focal length, and the farther away from the subject, the greater the depth of field. 6. Maximum digital printing rules If you want to print a work into a large-size photo, the size of the photo cannot be greater than the length, width and pixels of the digital picture divided by 200 respectively. If the job requirements are high, score at least 250.