Traditional Culture Encyclopedia - Photography major - How to adjust Nikon SLR exposure?

How to adjust Nikon SLR exposure?

How to debug aperture and exposure of Nikon camera

First set it to manual mode, that is, M gear ... There is a pinion next to the viewfinder to adjust the aperture. It is displayed on the screen as FX. X. The smaller the number, the larger the aperture ... exposure. You mean the blinds? There is also a pinion next to the lens. Adjust the shutter.

How to adjust Nikon camera overexposure? Please help me.

First of all, a SLR camera?

In addition, you want to overexpose and get small fresh photos; Or is it overexposed now and you want to expose it normally?

Several methods, you can try:

1, you can adjust the focal length and put it on your face or some light-colored objects, which may be better.

2. Correct the exposure by manually modifying the aperture and shutter values.

3. Another simple method is to adjust the exposure compensation (press the key combination to adjust the exposure compensation (EV+ dial)), where+means overexposure and-means underexposure.

All staff, please encourage.

How to set the exposure time of Nikon SLR

Ask questions and you will know that you are a beginner. I'll tell you a simple method: aim at the subject with P gear, tap the shutter to measure light, see the speed and aperture value in the viewfinder, change different objects and different light directions, and see the value change in your mind. Change the aperture with A gear and the speed with S gear, and you will know their relationship over time.

How to set long exposure for Nikon D90?

Use a cable release with a quick lock to install the tripod.

When the camera is set to M or S, turn the wheel to adjust the shutter for 30 seconds, and then continue to turn the wheel, and the B door will appear. At this time, you can decide the exposure time yourself.

When shooting, use a small aperture, release the locked shutter with a cable, and then unlock it after proper exposure to complete one exposure.

How to adjust the exposure of Nikon D3300 digital SLR camera?

1, "exposure" is not a standardized term for photography. Similar technical terms include:

The exposure value (EV) of 1. 1 directly reflects the light intensity of the spot and cannot be adjusted.

1.2 exposure fine-tuning (also called exposure compensation, that is, increasing or decreasing EV), deliberately overexposed or underexposed the film according to the shooting intention to create a special light atmosphere.

1.3 sensitivity (ISO) to adjust the exposure sensitivity of the sensor. For example, when the scene light is too dark, the exposure sensitivity can be improved, the shutter speed can be ensured to be high, and the influence of hand shaking on shooting clarity can be avoided.

1.4 Select exposure mode, full automatic exposure, program automatic exposure, aperture priority automatic exposure, shutter priority automatic exposure, manual exposure and various scene modes.

2. Guess that the "exposure adjustment" you said refers to the most common setting of ISO. Adjustment methods and preconditions are:

2. 1 Automatic ISO defaults to automatic exposure (automatic setting is replaced by machine to avoid manual setting error).

2.2 Fixed ISO value can manually set automatic exposure P, aperture priority automatic exposure A, shutter priority automatic exposure S and manual exposure M files in the program. There are two ways to set manually:

2.2. 1 use the shortcut key I(I(LCD) at the lower left edge to enter the information display state, use the arrow keys to highlight the ISO value position, and press the OK key. At this point, a selection icon appears, select the desired value, and then press OK. The following figure

2.2.2 Use the MENU key to enter the menu, select the shooting menu of the camera icon, find the ISO sensitivity option, right-click the direction key to enter the numerical selection, and then press OK to set.

2.2.3 In the Nikon SLR shooting menu, there is also a very user-friendly "automatic ISO control" option. That is, when the exposure parameters such as fixed ISO we set are limited by the equipment and cannot meet the effective shooting conditions, the machine will start the automatic ISO. Moreover, this function can set the maximum allowable ISO value in advance and start the lower shutter speed limit of automatic ISO. This function can be set by first setting "Automatic ISO Control" to on, and then setting the highest ISO value and the lowest shutter speed.

How to quickly set exposure compensation for Nikon d3200 entry-level SLR M file

There is no operation of exposure compensation in M-range, and exposure compensation is only available in automatic or semi-automatic mode. The so-called exposure compensation is actually that the camera forcibly brightens or darkens the picture by controlling the size of the shutter or aperture according to your exposure compensation settings. For example, when you use the aperture priority mode, you set the aperture value and ISO, and now when the exposure compensation is 0, give your subject a shutter of 1/200, and then you adjust the exposure compensation to+1, then the system will force your shutter to be lowered to1125, and then your picture will be displayed.

When you are in the m range, exposure compensation is meaningless because the aperture and shutter must be set manually. If you want a darker point, you just need to adjust it yourself.

The photos taken by my camera are very explosive! Almost all white! Why is this? How to adjust it? Please give me your advice. (Nikon SLR camera)

First of all, the exposure of the camera has the most direct relationship with sensitivity, shutter speed and aperture. Increase sensitivity and increase exposure. Decreasing shutter speed will increase exposure, and increasing aperture value will increase exposure. "The smaller the aperture value, the larger the aperture, such as F3.5F4.0" If you want to reduce the exposure, you have to do the opposite. Then tell me how to do it here. 1. Look at the exposure "ruler" inside through the viewfinder of the camera. (Just like a ruler scales) 2. Adjust the focal length. (composition) 3. Control the exposure (if there is a deviation in the scale-"negative" means that the camera thinks the exposure is insufficient and needs to increase the exposure until the "wandering code" is adjusted to the middle, and the exposure is basically no problem. ... and then there are several kinds of cameras to measure light, and the landlord can also learn about it. There are no examples here.

What are the specific operation steps of exposure locking of Nikon SLR camera?

The exposure lock is AE-FE key. Press and hold this key to lock the exposure value at that time. When the viewing brightness changes, the camera will no longer automatically measure and set.

Exposure locking is just an option. AE-FE button can lock exposure value and focus at the same time, or lock one item separately, which can be set in the menu. The camera is not at hand and cannot be verified. Look at the menu, it's easy to find it, and then press? The point is, there's a hint.

How to adjust the exposure of the photos taken by Nikon camera D3 100?

The exposure should be normal, and it may be a lens problem. Try wiping with a lens pen or lens cloth. Or you can try to reduce the exposure. Press the I key in the lower left corner of the fuselage, and a panel will be displayed on the screen. Use the direction keys to move the cursor to a line with arrows on both sides in the middle, that is, exposure compensation, and then use the dial wheel to adjust.

Why is the exposure compensation value of my SLR M file negative three? How can I transfer it back?

Hello.

The exposure compensation in M files is different from that in AV and TV files. AV and TV files are exposure compensation, so adjust the exposure you need (for example, if you need less exposure, lower the file 1/3).

In the range of m, exposure compensation is actually like an indicator. If it is negative, it means that you are underexposed to the metering mode at this time. You just need to open the aperture a little or slow down the shutter, and it will change accordingly. Theoretically, 0 is the correct exposure.