What kind of detector can I buy for car GPS locator to find the accurate location on the car?

It depends on the type of GPS locator. If it is a wired GPS: you can search slowly along the power cord of the car, and you will always find it, because the wired GPS needs to be connected to a power source. Can be powered on. You can also use a GPS signal detector to search, because the wired GPS will send the current GPS position to the server every ten to tens of seconds. Just find a relatively open place with no one passing around 20 meters away, and use the handheld signal to detect it. Detector, adjust the sensitivity, and scan slowly from the inside to the outside of the car to see if the signal can be detected. If a signal is found, then move to judge the signal strength. When the signal is full, the GPS will be around the detector. , you can find it out at this time.

If it is a wireless GPS locator (it does not need to be connected to power, it is basically stuck on with the help of magnetism), you can also check manually first, such as the front and rear bumpers, the trunk, the armrest box, and the passenger seat. It is also possible to install it underneath, in the glove box in the passenger position or in the door glove box, or even on the chassis (waterproof bag required).

If you cannot find it manually, you have to use a professional GPS positioning system to detect it, because this type of GPS locator is manually set and will only transmit frequently at certain intervals or at a fixed time every day. It is in dormant state. It cannot be detected by any tool in the dormant state. It is recommended to find a professional company to use professional equipment to detect this type of GPS.